|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 9th, 2008, 16:49
|
#1 |
|
TM discharger
Hi guys I really need your help. I bought a TM discharger this one:
 And I just got my new Sanyo 9.6V 1700mah NICD nunchuck battery. I was wondering if this discharger will be good for it or its gona broil ? Cause the fact is that I didnt pay attention if it was written on the box or not but even if it was written I dont read japenese lool !!! I hope you will be able to help me guys
__________________
CA M4/WE 1911 EF-05 |
|
|
|
December 10th, 2008, 00:36
|
#2 |
|
So long as you're sure your battery is NI-CAD then to my knowledge it should be fine. But like i said i'm not 100% sure so don't come knocking down my door if it toasts your battery
 .A link to your exact model of discharger that you bought would be helpful And btw fyi Ni-cads should be discharged before each charging. Good luck. -Brett
__________________
|
|
|
|
|
December 10th, 2008, 01:17
|
#3 |
|
If memory serves me right, only NiCd batteries should be discharged before charging. NiMh should just be topped off.
This is what I've been doing with my batteries, so far they've lasted me. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
