|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 8th, 2008, 00:17
|
#1 |
|
M16 Mag Feeding Problem
I have two CA M16's both of them have Trouble feeding any mag that is not CA, but what I have notices is that the Mags have to be pushed up a slight bit in the mag well in order to feed Properly, but if I'm not holding it up no rounds make it to the barril.
I can see the mags making Contact with the hop up unit, but I dont think its sitting Properly... the Mags in question are: KA M16 mags x5 Dboys C7 thermal hi caps x2 Friendly tips and Advice are welcome! cheers! Last edited by Voice of Reason; September 8th, 2008 at 00:28.. |
|
|
|
September 8th, 2008, 00:22
|
#2 |
|
The general consensus around here is that if you have CA body, you use CA magazines. King Arms magazines in particular seem to have fitment issues with CA bodies.
|
|
|
|
|
September 8th, 2008, 00:40
|
#3 |
|
try TM mags
|
|
|
|
|
September 8th, 2008, 02:53
|
#4 |
|
if there's sitting too low, the hopup is not pressing in the BB retainer enough to let the BB's go by. Try filing down the BB retainer on the mags [wedge shaped piece at the mouth of the feed tube].
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
September 8th, 2008, 09:55
|
#5 |
|
Tys
|
Mike, if we hook up today, bring one of your mags with you...I'll show you how/where to file.
Tys |
|
|
|
|
September 8th, 2008, 13:47
|
#6 |
|
|
sweet thanks Styrak and M102404 for the help!
:.:EDIT:.: All mags problems resolved thanks Tys Last edited by Voice of Reason; September 10th, 2008 at 18:46.. Reason: Update |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
