vsr upgrades

element62skater · August 5th, 2008, 00:06

im thinking of upgrading my vsr with:
laylax spring guide
m150
laylax tb
firefly bucking
high pressure piston
new sears
would this setup be reliable or are there any other parts i would need to change?

also what do you think my fps will be with a .3? and do you think that is heavy enough?

ZeroAlphaOne · August 6th, 2008, 00:23

Check out this thread, It might be helpful to you ?

http://www.airsoftcanada.com/showthr...t=vsr+upgrades

tsuru · August 7th, 2008, 12:16

That setup sounds good. Three suggestions though.
1.) Make sure the Firefly bucking you get is the hard version. The soft versions will probably be severely deformed by the velocity that the M150 will output.
2.) If you're doing the sears and the piston anyways you might as well get the Zero Trigger instead. It costs marginally more than the parts it replaces and is an easier upgrade to install. (Replaces both sears and comes with an upgraded piston) Plus it makes returning the bolt to battery easier than with sears.
3.) I'm a big fan of barrel spacers. For an extra $10 why not?

0.30g BB's should be fine for that FPS level although you may want to try heavier ammo as well. I definitely would not go lighter than 0.30g though.

Muffin · August 7th, 2008, 18:09

What make is your VSR?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 5th, 2008, 00:06	#1
element62skater Trader rating Join Date: Apr 2007	vsr upgrades im thinking of upgrading my vsr with: laylax spring guide m150 laylax tb firefly bucking high pressure piston new sears would this setup be reliable or are there any other parts i would need to change? also what do you think my fps will be with a .3? and do you think that is heavy enough? __________________ AE V4 MP5: prommy tight bore woodland paintjob metal scope mount + red/green dot scope --------------------------------------------------- full navy seal team 7 loadout

August 6th, 2008, 00:23	#2
ZeroAlphaOne Trader rating Join Date: Apr 2008 Location: Christchurch, New Zealand	Check out this thread, It might be helpful to you ? http://www.airsoftcanada.com/showthr...t=vsr+upgrades __________________ http://www.tagairsoft.co.nz SEG's: TM-CAR15, TM-G&P M4/SR16 Custom, TM-M4A1 Custom, TM-G&P MI6 VN Custom, TM-SR16, TM-M4S System, G&G G4-CQB-R. Sniper Rifles: 2x TM-VSR G Spec's Shotgun: Marushin Mossberg M500SSB 8mm. Gas Pistols: TM-Sig 226, TM-Socom Mk23, TM-Tactical Master. TM Glock 17 3rd Gen. You Can Never Own Too Many Weapons !

August 7th, 2008, 12:16	#3
tsuru Trader rating Join Date: May 2004 Location: Winnipeg, MB	That setup sounds good. Three suggestions though. 1.) Make sure the Firefly bucking you get is the hard version. The soft versions will probably be severely deformed by the velocity that the M150 will output. 2.) If you're doing the sears and the piston anyways you might as well get the Zero Trigger instead. It costs marginally more than the parts it replaces and is an easier upgrade to install. (Replaces both sears and comes with an upgraded piston) Plus it makes returning the bolt to battery easier than with sears. 3.) I'm a big fan of barrel spacers. For an extra $10 why not? 0.30g BB's should be fine for that FPS level although you may want to try heavier ammo as well. I definitely would not go lighter than 0.30g though.

August 7th, 2008, 18:09	#4
Muffin Trader rating Join Date: Sep 2007 Location: Manitoba	What make is your VSR?

vsr upgrades

Upgrades & Modifications