|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 10th, 2008, 09:42
|
#1 |
|
CA G36C not shooting right
My G36C is not shooting right, after about 50 feet they start to sag, and no mater how much you turn the hop-up nothing happens. can anyone know what's rong.
note: Huricane full tune up kit with a 120 and a thight bore barrel. Thanks Sean |
|
|
|
July 10th, 2008, 10:23
|
#2 | |
|
Sounds like you forgot to put the little bucking back in the hop-up when you installed the new barrel.
__________________
 Quote:
|
|
|
|
|
|
July 10th, 2008, 10:42
|
#3 |
|
|
would not puting in the bucking do that? i put in a new stock CA hop up ruber after puting in the new barrel.
|
|
|
|
|
July 10th, 2008, 10:47
|
#4 |
|
yes, missing bucking would deem your hop-up useless
|
|
|
|
|
July 10th, 2008, 11:00
|
#5 |
|
|
ok i'll have to take it apart and check.
thanks guys |
|
|
|
|
July 10th, 2008, 11:09
|
#6 |
|
The hopup rubber is what provides the air seal. The bucking is what imparts the backspin on the BB. Without that, it doesn't matter how much you adjust the hopup setting, because there's nothing there to set. That would give exactly the results that you're seeing.
__________________
|
|
|
|
|
July 10th, 2008, 12:24
|
#7 |
|
|
Ok, thanks
Sean |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
