Classic Army M15A2 RIS Prometheus M120 Upgrade?

[magicmuggle]

I upgrading my Classic Army M15A2 RIS spring to a Prometheus M120 spring, I have the AEG stripped down except for the Safty Switch, does anyone know how to safely remove it so I can get access to the spring?

[Cutlass]

the gear box should just pull out if you have the motor and hand grip removed and pins in the body taken out the switch stays in but if need be ask an expert

[Crunchmeister]

Yeah, you don't need to remove the switch from the body to remove the mechbox... you need to remove the grip, the 2 main body pins, and the smaller pin right above the trigger. The mechbox should pop right out easily.

[Styrak]

Originally Posted by Crunchmeister

Yeah, you don't need to remove the switch from the body to remove the mechbox... you need to remove the grip, the 2 main body pins, and the smaller pin right above the trigger. The mechbox should pop right out easily.

And the magazine catch. And the hopup if it's a 2 piece.

[Crunchmeister]

Oh yeah... the mag catch. Duh!.... Unless it's a sportsline series, the CA hopup is a 1-piece metal and isn't an issue.