|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 18th, 2008, 06:01
|
#1 |
|
guarder p226 metal kit for TM no turning back
hi guys,
is it true if upgrading TMp226 with guarder metal slide n frame there is no turning back to the abs stock because of the slight mod? need help guys... thanks... |
|
|
|
March 18th, 2008, 06:13
|
#2 |
|
Formerly Muffinman
|
Unfortunately I'm going to say yeah. Planishing those two bits off to make the gas blowback unit fit into the slide is pretty permanent. Otherwise the TM GBB unit is just held in place by the two rear screws that attach the sights to the slide together.
I'd much prefer the ACTION, Prime or Creation slides to the Guarder one.
__________________
|
|
|
|
|
March 18th, 2008, 10:39
|
#3 |
 A Total Bastard
|
I +1 The Creation, it was a painless drop in job, little more expensive, esp for me since I got the full kit
 But finish, quality, and overall said and done, well worth it.
__________________
W1-5 |
|
|
|
|
March 18th, 2008, 19:13
|
#4 |
|
Creation slide looks awesome and fits great. I've had a lot of issues since installing it, but it does fit well and look great.
__________________
|
|
|
|
|
March 18th, 2008, 19:22
|
#5 | |
|
A Total Bastard
|
Quote:
__________________
W1-5 |
|
|
|
|
|
March 18th, 2008, 19:44
|
#6 |
|
Low FPS
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
March 18th, 2008, 19:59
|
#7 |
|
I have had zero issues with my creation slide installed. Crunch maybe order the PDI piston head and see if that solves your problems.
|
|
|
|
|
|
March 18th, 2008, 21:26
|
#8 | |
|
|
The problems in question are that it's a gas hog. I can barely get 1 mag on a full propane fill, and that I can barely break 260 fps with it. With its new slide, piston (the one that came with the Creation slide), tightbore, and enhanced nozzle, it should give me both much better gas mileage and higher velocity than that.
Quote:
__________________
|
|
|
|
|
|
March 18th, 2008, 22:39
|
#9 |
|
A Total Bastard
|
What else are u running with it? Upgrades wise, springs, tightbore? I have zero problems as well running full creation, 150% springs, tightbore and a nozzel upgrade kit with regular mags, I get full gas per mag, great consistant shots, ect. So hopefully its just something off that can be tweeked.
__________________
W1-5 |
|
|
|
|
March 18th, 2008, 23:57
|
#10 |
|
|
some people recommend dyna nine ball piston is good to produce higher fps on the gun... anyone tried this??
anyone can show the picture of TM P226 with guarder metal kit?? esp the one with chrome color... |
|
|
|
|
March 24th, 2008, 06:19
|
#11 |
|
I installed a Shooters Design piston head & recoil spring for a TM Hicapa 5.1 and it performs great with a stock plastic slide! FYI...
__________________
Kevorkian  I SUPPORT THE USE OF SILICA BB BASTARDS! |
|
|
|
|
March 24th, 2008, 06:50
|
#12 | |
|
|
Quote:
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
