TM SIG552 final modifications

[tedan628]

Yo folks,

I just want to share my finished Tokyo marui SIG552 upgrades last week with following items (v3 versions)
1. Systema silent piston and cylinder head sets
2. Guarder Spring guide
3. M110 Prometheus spring
4. Polycarbonate Guarder piston body
5. Metal bearings
6. Metal Gear sets by Classic army
7. 6.03 mm tight bore JBU

As final performance the gun simply perform much--much better than original 'crappy TM' sets. I havnt chrono it yet, but soon i will. Now with these modifications, require me also to upgrade my battery with higher voltage, i use 9.6 v 2000mAmp (with PEQ box--i choose D-boys, cos it s cheap).

PS: Disassembling the gun was a little tricky in the beggining, but as long as u have enough patience to rock this gun, then it wont be any problems at all. Beware with the cables and know very well where they go inside the gun before u diassemble the whole gearbox. I found TM guns are more complicated than any other brands. If u have any cameras, make sure u took lots of pict for every step disassembling.

One more thing, i ve been trying to upload pictures here for u guys, but i always had a problem uploading them. If anyone know how to do it properly, please let me know. Maybe the image file is too big???

Thanks..gud luck out there!!

[NovaKaynE]

You need a file host. Try www.photobucket.com to host your pictures.