CA25 air nozzle

[Trivium01]

I'm looking to upgrade the air nozzle on my CA25. However, the nozzle itself appears to be an odd size. Are there are after market air nozzles that would work on this gun, or is the standard classic army air nozzle all there is?

[The Saint]

All else being equal (ex. mechbox version), air nozzle is dependent on gun model, i.e. all AKs use a particular size, all G36s use another, all M14s yet another, etc.

CA25 should use standard M16/M4/etc nozzle from any aftermarket brand. However, not all nozzles are equal. Some are better made than others, some are slightly different in size from the actual stock nozzles.

Generally speaking, unless there's something wrong with your nozzle, leave it be.

[Amos]

IIRC, The CA25 uses a longer nozzle and a longer cylinder than normal M16/M4

Since It's such a new gun; You're gonna have to wait a while until some one comes out with upgrade parts for it.

[CDN_Stalker]

One thing about nozzles, some hop up units like some after market types, other hop up units don't. Air leaks could be a result. Aka: A G&P SPR I upgraded more two years ago, it came stock with a square ended metal nozzle and replaced it with an aftermarket metal nozzle that was tapered (like lots of other nozzles). The G&P hop up unit didn't like it much, saw about a 50-60fps drop in expected velocity. Replaced the hop up unit with another brand, got those feet per second back up to where we expected it to sit.

[SEALs]

Just like my G&G GR-25 we use special nozzle cannot be found anywhere beside the manifacturer website and its only the stock ones.