|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 11th, 2006, 00:59
|
#1 |
|
Full auto is fun...but
Having a small problem with Glock 18C with a metal slide and barrel. Since I've reassemblied it it only shoots on full auto no matter what position the selector switch is in? I don't think that I missed anything part or install wise as I've double checked a number of sources. The only thing is that the selector switch is a little loose. Does anybody have any ideas for a fix? Fully auto it fun but I have BB's everywhere and the wife is stating to have words with me because of this.
Any help would be appriciated. Thx Jakster |
|
|
|
December 11th, 2006, 01:20
|
#2 |
|
Guest
|
i don't have one so i can't help much but it sounds like the piese that moves when you change the fire selector to stop it from going full auto is either loose, too tight, not correctly connected or stuck. i'd suggest tinckering with it till it works.
|
|
|
|
December 11th, 2006, 13:41
|
#3 |
|
|
Been tinckering with it for a while now with no luck. This thing is driving me nuts.
|
|
|
|
|
December 11th, 2006, 14:08
|
#4 |
|
Official ASC Bladesmith
|
Did you follow this?
http://www.wgcshop.com/g18c-slide-install.html Maybe you have to keep the selector switch centered when you reassemble. Also, have you put oil in around those areas? |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
