|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 4th, 2006, 00:37
|
#1 |
|
M4 Slither Stock install... tips??
Hey I'm looking at putting a M4 Slither stock on either an MP5PDW or a MP5 SD6, and I was just wondering if anyone has any tips or a walkthrough kind of thing on installing a slither stock... any help would be great, since I am going to be out a school in a week and will have access to little to no supplies.
Thanks, Beach_boy
__________________
We'll do it like the Italian Job! |
|
|
|
January 4th, 2006, 11:21
|
#2 |
|
Official ASC Bladesmith
|
I used the A5 end cap (retractable stock one), some washers to build up the area inside, a longer bolt and a nut on mine. Apoc just put a Crane stock on his MP5 PDW, used the plate that is part of the folding stock, a bolt & nut to mount his. A few other guys have mounted the slither stock using the K end plate with the sling loop removed. You should be able to do it with a bit of figuring out and minimum tools/supplies. On mine, I can revert back to an A5 easily since I didn't have to mod any parts at all.
|
|
|
|
|
January 5th, 2006, 00:18
|
#3 |
|
|
Sweet stuff thanks...
__________________
We'll do it like the Italian Job! |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
