Gun does not shoot straight

[pinoyboy]

I think I got mine working out a little better. The bbs are getting much more range now.

It seems like by putting too much silicone oil, it doesn't give the hop up rubber enough friction for it to give the bb backspin. This probably happened when I put silicone oil in my barrel, in my cnnister of bbs and through my hi cap.

I found that out when I took the hop up assembly out and wiped some of the excess silicone off. Then, the bbs I used weren't sprayed with silicone oil.

I put it back to gether and took some test shots. My first shot actually looked wierd to me because its been a while since I've seen a bb shoot and then gradually "hop" up. Now my hop up is working again, although they are still curving, but not as bad.

[D_oo_S]

Originally Posted by Slacker

I got a Prometheus tightbore for my ICS M4 not too long ago, and when I was changing out the old stock one for the new upgraded one, that little black rubber tube fell out of the hop up assembly. Well I figured out where it goes and got it back in a couple days later, so my up/down function of my hop up is working now, but now my gun is very inconsistent. Sometimes it curves left, sometimes to the right, and sometimes it curves up, sometimes down, and sometimes a combination. Any ideas as to what my problem is? It's a brand new tightbore, which should be more accurate and I can tell that it's getting more range from it, but it's just being really inconsistent. Any help would be much appreciated.

Thanks,
~Slacker

That happend to me once. I just bought a brand new hop up unit from ICS. Works fine now, And I fixed the old on, It was because the little "nub" was chipped, it was missing a little piece of it.