crane battery mod

[rat]

Originally Posted by ILLusion

maybe. But you do realize that is a different class cell. The diameter is smaller and internal resistances are higher.

You lose all the benefits of using the Prime stock buy using that cell. You might as well get the G&P one in that case which has a much more elegant battery solution using those exact 1700mAh A-cells. Not only that, but the dimensions are closer to real steel.

crap!


ok can someone definitely say for sure that the G&P stock CAN be collapsed fully with a 1700 9/6v battery? If so i gotta sell sell sell!!!! :roll:


edit: never mind...i found a post where illusion said it can be fully collapsed.

[Scarecrow]

http://www.milsimairsoft.com/modules...=article&sid=7

[rat]

Originally Posted by Scarecrow

http://www.milsimairsoft.com/modules...=article&sid=7

very nice tutorial.

unfortunately this is for an 8.4v mod. mine is a 9.6v.

i would be able to do the 8.4 in a heartbeat using dean connectors to maximize space....but even with the deans on the 9.6 there are the aforementioned issues.

thanks though, im sure it will prove usefull to someone on these boards. :-D

[Duff]

not too sure on the idea of using a solder wich as wire since there might be some resistance in there. But I never attached my DMM to a solder wick before too. :razz: