Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Aster installation issue - help needed!

:

Doctor's Corner

Reply
 
Thread Tools
Old March 25th, 2020, 11:02   #1
volteco
 
volteco's Avatar
 
Join Date: Jul 2012
Location: Etobicoke
Aster installation issue - help needed!

I have installed Aster MOSFET and I don't have any response when I press the trigger. It gives 3 motor beeps when I connect the battery and the LED next to the trigger sensor flashes RED and YELLOW rapidly 3 times and then turns off. I don't see white light coming from it as shown on promotional pictures. When I do it with the gearbox opened the trigger sensor reacts to the light - if I shine the light on it, motor beeps and the other LED flashes RED and YELLOW again. I do have to mention that I have purchased front a wired unit and resoldered it to be a back wired. Any advice would be very much appreciated.
volteco is offline   Reply With Quote
Old March 27th, 2020, 10:37   #2
Zfurlong
 
Join Date: Sep 2014
Location: Oromocto
It's possible either too high or too low of a voltage battery or mah or max draw rating, or wrong type of battery (I had a similar issue with a titan MOSFET while using an 11.1v LiPo, which was rectified by using a 7.4)
__________________
current armament:
mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.
Zfurlong is offline   Reply With Quote
Old March 27th, 2020, 10:38   #3
Zfurlong
 
Join Date: Sep 2014
Location: Oromocto
One other possibility is that you reversed the wires when resoldering by mistake
__________________
current armament:
mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.
Zfurlong is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 23:15.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.