BTC Spectre MK2 Issues

catsgowoof · April 24th, 2018, 15:31

Hi everyone, I've got a BTC Spectre Mk2 installed in my VFC VR16.

When I press the trigger, there's a short, dull "click" and the gears then lock up, with two beeps from the motor coming thereafter.

I thought that this might be because of tight gears, so I've taken out all the shims and even tried the stock gearset without success. I've also taken off the grip plate and depressed the motor down with my finger and attempted to cycle it, thinking it was the motor being pressed down too far, but again, two beeps and then nothing. I've also tried two separate motors, one high-torque and one stock, both of which I know work.

Any suggestions would be great!

chaz · April 24th, 2018, 15:42

What is your digital fuse setting at?

ThunderCactus · April 24th, 2018, 15:49

Well according to the MANUAL, you are tripping the digital fuse.
Either its set too low, or you have a short in the wiring.

pestobanana · April 24th, 2018, 17:04

Remove the motor, plug it in, switch to semi, pull the trigger. If the motor spins for a second and then stops, the Spectre is fine, your gearbox build is the issue.

catsgowoof · April 25th, 2018, 18:18

Alright, so I've figured it out and I've gotten everything working. Thanks for everyone's input.

Turns out that both lipo's I was using were toast despite them appearing green on my smart charger. Another one I found in a box seems to hold a charge, and now the rifle is spinning. I'll run some diagnostics for you guys later on.

Weird though how low voltage gave me the two-buzzes...

ThunderCactus · April 26th, 2018, 00:10

Probably wasn't a low voltage error as far as the BTC is concerned

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 24th, 2018, 15:31	#1
catsgowoof Trader rating Join Date: Nov 2015 Location: Toronto, ON	BTC Spectre MK2 Issues Hi everyone, I've got a BTC Spectre Mk2 installed in my VFC VR16. When I press the trigger, there's a short, dull "click" and the gears then lock up, with two beeps from the motor coming thereafter. I thought that this might be because of tight gears, so I've taken out all the shims and even tried the stock gearset without success. I've also taken off the grip plate and depressed the motor down with my finger and attempted to cycle it, thinking it was the motor being pressed down too far, but again, two beeps and then nothing. I've also tried two separate motors, one high-torque and one stock, both of which I know work. Any suggestions would be great! __________________ LO: KAC URX 3.1 / Noveske M4 Inferno Guarder TM G17

April 25th, 2018, 18:18	#5
catsgowoof Trader rating Join Date: Nov 2015 Location: Toronto, ON	Alright, so I've figured it out and I've gotten everything working. Thanks for everyone's input. Turns out that both lipo's I was using were toast despite them appearing green on my smart charger. Another one I found in a box seems to hold a charge, and now the rifle is spinning. I'll run some diagnostics for you guys later on. Weird though how low voltage gave me the two-buzzes... __________________ LO: KAC URX 3.1 / Noveske M4 Inferno Guarder TM G17

April 24th, 2018, 15:42	#2
chaz Trader rating Join Date: Jan 2006 Location: Ajax	What is your digital fuse setting at?

April 24th, 2018, 15:49	#3
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Well according to the MANUAL, you are tripping the digital fuse. Either its set too low, or you have a short in the wiring.

April 24th, 2018, 17:04	#4
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Remove the motor, plug it in, switch to semi, pull the trigger. If the motor spins for a second and then stops, the Spectre is fine, your gearbox build is the issue.

April 26th, 2018, 00:10	#6
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Probably wasn't a low voltage error as far as the BTC is concerned

BTC Spectre MK2 Issues

Doctor's Corner