|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 14th, 2016, 21:23
|
#1 |
|
G&G tr4-18 not feeding properly
This one is pretty weird.
So when I load midcaps (tried various types, as well as hi caps) all the way, halfway, 3/4, etc, the gun seems to not feed properly, and the BBs will shoot maybe 1 or 2, then nothing for 5-10 trigger pulls, then BBs roll out the barrel or sort of explode out all at once, then the gun shoots a few normally, and back and forth more or less. IF i take these same mags and only load in 30 rounds, they feed and cycle properly with essentially zero issues. I have changed the hopup unit entirely, and tried different bucking. This apparently does not seem to be the problem. This model of gun has a blowback mock bolt piece that i am reluctant to take off, but it looks like I'll need to. Does anyone have any ideas on what the problem could be? |
|
|
|
|
June 14th, 2016, 23:15
|
#2 |
|
UPDATE - opened the gearbox on the front of it (tip of cylinder) is cracked and broken. Problem located?
|
|
|
|
|
|
June 15th, 2016, 00:27
|
#3 |
|
"bb bukakke" KING!
|
what brand of bbs are you using?
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
|
|
|
June 15th, 2016, 06:57
|
#4 |
|
I use BB bastard .25s, also tried with valken .25s
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
