|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 11th, 2016, 11:35
|
#1 |
|
VFC 416 - Stock Squishy trigger upgrade?
Yo!
The AEG = - 2012 VFC HK 416 - 11.1v 20c Firefox lipo - Lonex Titan A1 high torque - Pico Mosfet - 425 fps on .2 The main plan in this upgrade is to get this stock trigger to be less squishy, & also fire the AEG with a shorter pull. . and if possible ... maybe close to an AR-15 type trigger weight?  :hammer:Willing to also hear some recommendations for some real good lipo batteries. I rather not have to buy a new motor. Which ways could we cut this cantaloupe? 
__________________
Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249 |
|
|
|
June 11th, 2016, 17:56
|
#2 |
|
YO G!!!
you have a lonex A2 (orange) i have that variable c lipo that you might wanna try (15c 25 burst) and the other 25c and 50 burst might make a difference but i doubt its a motor issue, i went from a stock vfc motor to tienly motor i had no difference in trigger response vinces vfc has the same feel with the squishy trigger |
|
|
|
|
June 11th, 2016, 18:01
|
#3 |
|
There's a way to tune it to become a hair trigger, but I don't know how. Pestobanana posted a video recently showing a VFC 416 with a hair trigger, so might be good to ask him (hell, I want to know too, and do my M4).
|
|
|
|
|
June 11th, 2016, 18:26
|
#4 |
|
BTC Spectre.
|
|
|
|
|
June 11th, 2016, 19:02
|
#5 |
|
|
Damn, a Spectre is expensive and a huge investment... I wonder if OP's problem with a long trigger pull and reset could be solved using a SPEED trigger.
|
|
|
|
|
June 12th, 2016, 01:15
|
#6 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
The problem is in the trigger trolley and mechnical interaction of the trigger to it.
You can mod it to have a shorter pull, but its a lot of tweaking work. Id go with the specter just out of convenience |
|
|
|
|
June 13th, 2016, 11:08
|
#7 |
|
|
The spectre would be nice upgrade, tad to expensive for me atm as I just recently put in a mosfet..*facepalm*
Would speed trigger be a mechanical alternative, and later down the line mesh well with a spectre mosfet upgrade?
__________________
Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249 |
|
|
|
|
June 13th, 2016, 20:54
|
#8 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
I'm not aware of the speed trigger having that feature. As far as I know it's an entirely cosmetic upgrade.
|
|
|
|
|
June 13th, 2016, 23:01
|
#9 |
|
The Speed trigger does have adjustable travel but I don't think you will get any benefits of this without swapping out the stock trigger assembly for a BTC Spectre.
|
|
|
|
|
June 13th, 2016, 23:04
|
#10 |
|
|
Even if you have the Spectre, you can do the hair line trigger with the stock trigger.
Speed and all the other ones are 100% gucci factor. |
|
|
|
|
June 14th, 2016, 13:16
|
#11 | |
|
Quote:
You can set the slack with the Speed trigger, but you can't adjust the over-travel.
__________________
The Steve has spoken. Last edited by EOD Steve; June 14th, 2016 at 13:26.. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
