|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 20th, 2015, 22:50
|
#1 |
|
Can't do math
|
Prometheus Barrel tight
So I got a Prometheus barrel today, for my CA G3.
It's about 4 thou too large on the outer diameter to fit smoothly down the bore of the outer barrel. I was wondering what you guys thought would be better. To use a long 11/32 drill bit or reamer through my outer barrel, or just polish down the Prometheus? The more lazy machinist side tells me just to use emery cloth on the inner barrel. The perfectionist in me is telling me to ream out the outer barrels. :banghead: Dimitri |
|
|
|
June 20th, 2015, 23:59
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Ream it out. Never mess with an inner barrel.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
