|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 8th, 2015, 14:26 | #1 |
TM M870 breacher HPA mag mod??
Hi¸
Is anyone aware if an aftermarket magasine to link a HPA rig to a M870 Breacher will be available in the near future I saw some modding for to get a M870 breacher HPA ready, but it a permanent mod, being able to just swap mag from propane to HPA rig would be amazing!! Thanks Bong
__________________
|
|
April 9th, 2015, 01:00 | #2 |
I'm unaware of any companies that are developing something like this specifically, but you could replace the gas fill valve with an HPA valve to achieve what you're looking for. Something along the lines of this: http://www.airsplat.com/cqb-russian-...tap-valve.html. You could just buy a second gas "mag" for the M870 and install this on it. It would pretty much allow you to swap between green gas and HPA pretty easily.
The only thing you would have to figure out is how to do this while keeping the stock intact, you may have to drill a hole into the stock or something to run the HPA line through. |
|
April 9th, 2015, 11:11 | #3 |
Indeed or install a new hpa valve at the bottom? Drill in do the thread and install the valve?
__________________
|
|
April 9th, 2015, 11:18 | #4 |
April 9th, 2015, 13:14 | #5 |
Yep saw it, it a permanent mod
__________________
|
|
April 9th, 2015, 15:35 | #6 | |
Quote:
|
||
April 9th, 2015, 17:12 | #7 |
Thanks
__________________
|
|
April 10th, 2015, 01:38 | #8 |
Get a 1/8 NPT tap and just add a second input at the bottom.
It's not permanent in the sense that you can remove the fitting and plug the hole with a standard brass plug. Or get a second mag. BTW I found that specific tap at CanTire. It's been useful quite a few times for HPA rigs already. |
|
April 10th, 2015, 09:02 | #9 |
Merci!!!!
__________________
|
|
|
Bookmarks |
|
|