Guarder 150% Enhanced Recoil/Hammer Spring

[GoSkyLine]

I'm looking for 150% spring for KSC P226
as per lurkingknight's post and youtube video
https://www.youtube.com/watch?v=9-V1DpLw-2w
http://www.airsoftcanada.com/showthread.php?t=145157

My question is, are the following spring set the same?

Guarder 150% Enhanced Recoil/Hammer Spring - TM Hi-CAPA
http://www.airsoftparts.ca/store2/in...oducts_id=1254

Guarder 150% Enhanced Recoil/Hammer Spring - TM 1911/MEU
http://www.airsoftparts.ca/store2/in...oducts_id=1256

[Sequential]

150% is too stiff for most stock guns. Stick to something lower than 150% like a 120%.

[GoSkyLine]

Thanks for the tips, the KSC P226 (Taiwan) has aluminum alloy slide, but I do plan to get a Z-parts metal slide. So, it will probably need a 150%

[lurkingknight]

I don't think it has to be the 150%, you can probably use a lesser hammer spring. IT just has to be stronger than the factory one.

Also there's a good chance you will loose the slide lock on the last round. not sure why, possibly the slide is moving too fast for the mag catch to come up all the way.

You can probably get away with using just the hammer spring and not the recoil spring.



This issue is not limited to just the kwa 226... I also observed this on my tm 5-7.It's possible shortloading the gas could also help, but like I said, you may not have enough gas to shoot the whole mag if you use less gas.

[Sequential]

Originally Posted by GoSkyLine

Thanks for the tips, the KSC P226 (Taiwan) has aluminum alloy slide, but I do plan to get a Z-parts metal slide. So, it will probably need a 150%

If you use a Steel slide you need 150% but if you have a aluminium, anything more than 120% is too much.

[GoSkyLine]

Alright, thanks guys. Placing order on KIC now.

[shootersaber]

Originally Posted by GoSkyLine

I'm looking for 150% spring for KSC P226
as per lurkingknight's post and youtube video
https://www.youtube.com/watch?v=9-V1DpLw-2w
http://www.airsoftcanada.com/showthread.php?t=145157

My question is, are the following spring set the same?

Guarder 150% Enhanced Recoil/Hammer Spring - TM Hi-CAPA
http://www.airsoftparts.ca/store2/in...oducts_id=1254

Guarder 150% Enhanced Recoil/Hammer Spring - TM 1911/MEU
http://www.airsoftparts.ca/store2/in...oducts_id=1256

Maybe you can try this one~~~
http://www.tokyo-model.com.hk/shop/p...?cPath=1_39_63