|
|
|
April 25th, 2014, 22:37
|
#121 | |
|
Quote:
|
|
|
|
|
April 25th, 2014, 22:45
|
#122 |
|
Whiny Attention Whore
|
I Tried too Pull the "Man Of the House" card... Not a good out come.
__________________
B.A. Level 3 Cert. |
|
|
|
|
April 26th, 2014, 00:59
|
#123 |
|
So uh, I guess some Speed Blade triggers for you Katana cats. I am thinking about doing this build myself after watching the video: https://www.youtube.com/watch?v=r0d8QwALs0w
__________________
Guardians of Asgaard |
|
|
|
|
April 26th, 2014, 11:09
|
#124 | |
|
Quote:
Available locally in Toronto. https://mach1airsoft.com/product-cat...nufacturer=644 Last edited by SuperHog; April 26th, 2014 at 12:50.. |
|
|
|
|
|
May 27th, 2014, 09:04
|
#125 |
|
|
Hi guys, hopefully some of you experienced katana owners can help me with this issue I've been having. When I dry fire my gun the nozzle head shoots and returns properly every single shot (I observed this through magwell). Once I insert it with loaded mags (I've tried multiple brands both hi and low caps), my gun misfires every other round in single fire mode. And when I take out my mag as the misfiring occurs, I see that the nozzle head is stuck in forward position inside the hop up. This occurs with both stock and modify hop ups. What can cause this issue?
|
|
|
|
|
May 27th, 2014, 12:15
|
#126 |
|
Do you have another cylinder to try? Might be the o-ring or whatever is in the piston head that retracts the nozzle is worn/tired and the spring pressure from the bb/mag is preventing it from retracting (so it's slipping off the pistonhead)
|
|
|
|
|
May 27th, 2014, 16:50
|
#127 | |
|
|
I have both blue and red cylinders, both same issues. Also i'm using two 9.6v batteries. it seems like the lower the charge, the more severe the problem is. But even on full charge it still happens. I'm wondering if shimming my gears and installing a MOSFET would help.
Quote:
Last edited by dreamkiller; May 27th, 2014 at 17:44.. |
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
