SCAR Rail Extension Compatibility

pestobanana · September 14th, 2013, 16:53

I'm considering getting a clone of the TangoDown SCAR rail extension ordered in. I'm just wondering if ones made for Marui will fit on VFC and vice versa. I know there are PWS clones already in country and made specifically for VFC, but I like the look of the TangoDown a lot better. Does anybody have first hand experience on compatibility?

shootersaber · September 30th, 2013, 08:29

Quote:

Originally Posted by pestobanana

I'm considering getting a clone of the TangoDown SCAR rail extension ordered in. I'm just wondering if ones made for Marui will fit on VFC and vice versa. I know there are PWS clones already in country and made specifically for VFC, but I like the look of the TangoDown a lot better. Does anybody have first hand experience on compatibility?

If you want Creation one . I can sure it is 100% for Marui ,but it is not fit VFC. Because in the back side , it has two plus for fix on marui scar body. I am not sure VFC ,is it with hole for fix this rail. may be can modify.
http://www.tokyo-model.com.hk/shop/c...tml?cPath=1_35

Kos-Mos · September 30th, 2013, 19:19

Quote:

Originally Posted by shootersaber

If you want Creation one . I can sure it is 100% for Marui ,but it is not fit VFC. Because in the back side , it has two plus for fix on marui scar body. I am not sure VFC ,is it with hole for fix this rail. may be can modify.
http://www.tokyo-model.com.hk/shop/c...tml?cPath=1_35

Not even close to what was asked...

pestobanana · October 9th, 2013, 17:44

Ummmm I meant this
http://echigoya-guns.com/guns/index....product_id=382

It looks flike there isn't an adapter for it like the Mad Bull PWS RX, does anybody know if it just attaches via the side rail screws?

pestobanana · March 24th, 2014, 15:00

UPDATE:

Got it in the mail, it can fit but takes some modding. Some material needs to be taken off under the attachment rails' screw holes. The nubs probably line up with holes on the TM SCAR, but these holes don't exist on the VFC. Screw alignment was also incorrect. Instead of butchering the attachment rail, I removed a bit less than a mm from the rear of the extension. The bottom rail does not line up correctly, but I was able to force my grip over.

lurkingknight · March 24th, 2014, 15:19

that looks rather smexy.. now if only someone would do something about that boot stock.

pestobanana · March 24th, 2014, 16:28

If only they made one that wasn't a buffer tube adapter... I hate buffer tube adapters on any gun.

Emre1337 · March 24th, 2014, 21:02

Would this rail extension fit a WE Scar L GBB? Btw Pestobanana, that scar looks sexy af!

Just noticed but I have that same mock suppressor, US Force Recon, Panther Armories or something, mine has a thread adapter stuck in it and it's useless now because it wont come off...

pestobanana · March 24th, 2014, 21:11

It will probably require modification, but considering it attaches via the two side rails it shouldn't be too hard to make it fit.

Mine got stuck too, I had to use a vice to remove it.

Emre1337 · March 24th, 2014, 22:06

Awesome, looking at the picture of it, it looks like it should fit hopefully without much modification.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 14th, 2013, 16:53	#1
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	SCAR Rail Extension Compatibility I'm considering getting a clone of the TangoDown SCAR rail extension ordered in. I'm just wondering if ones made for Marui will fit on VFC and vice versa. I know there are PWS clones already in country and made specifically for VFC, but I like the look of the TangoDown a lot better. Does anybody have first hand experience on compatibility?

March 24th, 2014, 15:19	#6
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	that looks rather smexy.. now if only someone would do something about that boot stock. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

March 24th, 2014, 21:02	#8
Emre1337 Trader rating Join Date: Mar 2014 Location: Mississauga	Would this rail extension fit a WE Scar L GBB? Btw Pestobanana, that scar looks sexy af! Just noticed but I have that same mock suppressor, US Force Recon, Panther Armories or something, mine has a thread adapter stuck in it and it's useless now because it wont come off... Last edited by Emre1337; March 24th, 2014 at 21:04..

October 9th, 2013, 17:44	#4
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Ummmm I meant this http://echigoya-guns.com/guns/index....product_id=382 It looks flike there isn't an adapter for it like the Mad Bull PWS RX, does anybody know if it just attaches via the side rail screws?

March 24th, 2014, 15:00	#5
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	UPDATE: Got it in the mail, it can fit but takes some modding. Some material needs to be taken off under the attachment rails' screw holes. The nubs probably line up with holes on the TM SCAR, but these holes don't exist on the VFC. Screw alignment was also incorrect. Instead of butchering the attachment rail, I removed a bit less than a mm from the rear of the extension. The bottom rail does not line up correctly, but I was able to force my grip over.

March 24th, 2014, 16:28	#7
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	If only they made one that wasn't a buffer tube adapter... I hate buffer tube adapters on any gun.

March 24th, 2014, 21:11	#9
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	It will probably require modification, but considering it attaches via the two side rails it shouldn't be too hard to make it fit. Mine got stuck too, I had to use a vice to remove it.

March 24th, 2014, 22:06	#10
Emre1337 Trader rating Join Date: Mar 2014 Location: Mississauga	Awesome, looking at the picture of it, it looks like it should fit hopefully without much modification.

SCAR Rail Extension Compatibility

Upgrades & Modifications