|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 4th, 2013, 00:00
|
#1 |
|
need an upgraded piston
ok so I recently made and installed a mosfet in my gun and rewired to 16awg ... I put it all back together and did a bit of testing. Really improved the responsiveness and rps. It sounded a bit funky so I fiddled with the motor height but it didn't seem to make a difference. well long story short my piston is stripped from the 3rd tooth onwards. The gun is a VFC 416 running on 7.4 liop so its good quality.
Anyways I would like some suggestions on what may have caused this and what I should be replacing with? Thanks! Here is a picture of the damage 
__________________
Keep your friends close ... and your enemies dead Last edited by brian-i-bunker-u; November 4th, 2013 at 12:50.. |
|
|
|
|
November 4th, 2013, 00:07
|
#2 |
|
Privateer Airsoft
|
Lonex extreme toughness
SHS 14 tooth Modify High Speed The stock VFC pistons aren't the greatest quality, so it's not that big of a surprise that it stripped.
__________________
I change primaries like other people change socks. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
