|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 30th, 2013, 12:11
|
#1 |
|
RS Noveske NSR on VFC Sr16?
Anyone know if it's possible to fit a Real Steel Noveske NSR on a VFC SR16 Upper?
(I know Madbull makes one, but it's incompatible with RS NSR Covers, etc.) Thanks. |
|
|
|
October 30th, 2013, 12:32
|
#2 |
|
Mr. Silencer
|
No. The receiver threads are not compatible. You'll need to rethread it to imperial as well as modify the thickness of the entire flange, depending on the barrel nut.
Beyond that, you may run into other issues with spacing of the rail from the upper, width of the upper, etc. Not saying it's not POSSIBLE, but it can be done - I've done a few. Last edited by Stealth; October 30th, 2013 at 17:56.. |
|
|
|
|
November 1st, 2013, 14:22
|
#3 |
|
|
Appreciate the response.
Would the KAC URX 4 work? |
|
|
|
|
November 1st, 2013, 14:33
|
#4 |
|
Mr. Silencer
|
A real one? No, for the same reason.
An Airsoft one like the Dytac one made for AEGs? Yes. |
|
|
|
|
November 1st, 2013, 17:16
|
#5 |
|
|
Liking the Dytac! Unfamiliar with the brand, but being as you guys (Airsoftstore) stock it, I trust it's a solid replica.
Being a Keymod System, and stating Exact dimensions, do you know if it will fit with the Noveske Polymer Panel Kit? I assume it should. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
