Anti Dry fire magazine mod help for VFC MP5

Metro · June 11th, 2013, 08:37

Hey looking people that have knowledge with VFC mp5. I saw the forum link to ra-tech that explain for 3 seconds that there is a piece that you can replace in the magazine to make it anti-dry-fire
Any that added the magazine piece to make anti Dry fire tried it? How well does it work? I want to know because I might buy about 15 of them for my co2 mags

N_Force · June 12th, 2013, 01:14

I believe it's a magazine follower. Unless Ratech has something new? You should have one come with your mag. When running out of bbs, this piece blocks the nozzle moving forward. It works good.
Personal I don't like the design. It's hard to change the piece. Also having high impact on follower and nozzle. If you don't have a reinforce follower, it may not function after a period of time use. Even the nozzle too. Finally I remove them.

Metro · June 12th, 2013, 11:03

thank you for your response

do you know where I can buy 15 of them?

N_Force · June 12th, 2013, 13:21

http://airsoftcanada.com/showthread....hlight=vfc+mp5

http://airsoftcanada.com/showthread....hlight=vfc+mp5

Check these might help

ILLusion · June 13th, 2013, 02:20

I have a bunch of the reinforced ones available, but even those ones couldn't hold up to the impact of the bolt after a few times. Ultimately, it's a stupid design, and I've just decided to run without them.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 11th, 2013, 08:37	#1
Metro Moving_target Trader rating Join Date: Mar 2005 Location: Ottawa	Anti Dry fire magazine mod help for VFC MP5 Hey looking people that have knowledge with VFC mp5. I saw the forum link to ra-tech that explain for 3 seconds that there is a piece that you can replace in the magazine to make it anti-dry-fire Any that added the magazine piece to make anti Dry fire tried it? How well does it work? I want to know because I might buy about 15 of them for my co2 mags

June 12th, 2013, 01:14	#2
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	I believe it's a magazine follower. Unless Ratech has something new? You should have one come with your mag. When running out of bbs, this piece blocks the nozzle moving forward. It works good. Personal I don't like the design. It's hard to change the piece. Also having high impact on follower and nozzle. If you don't have a reinforce follower, it may not function after a period of time use. Even the nozzle too. Finally I remove them. __________________ aka Uncle Last edited by N_Force; June 12th, 2013 at 01:18..

June 12th, 2013, 13:21	#4
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	http://airsoftcanada.com/showthread....hlight=vfc+mp5 http://airsoftcanada.com/showthread....hlight=vfc+mp5 Check these might help __________________ aka Uncle Last edited by N_Force; June 12th, 2013 at 13:25..

June 12th, 2013, 11:03	#3
Metro Moving_target Trader rating Join Date: Mar 2005 Location: Ottawa	thank you for your response do you know where I can buy 15 of them?

June 13th, 2013, 02:20	#5
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	I have a bunch of the reinforced ones available, but even those ones couldn't hold up to the impact of the bolt after a few times. Ultimately, it's a stupid design, and I've just decided to run without them. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

Anti Dry fire magazine mod help for VFC MP5

Doctor's Corner