becoming wetarded

[Hectic]

Thanks Eeyore. I got 5 commin from HK (a member here just happened to be there lol) on friday so i can play saturday with my new toy.
I went with the modify rubber as i liked it in my VSR back befor i went laylax.
And i had a stock TM vsr 430mm inner (i think its aluminium either way im surd its better then the stock WE inner) it was s simple mod the existing slots needed to be widened a bit and it needed 2 additional slots made a lil further from the end to accomodate the seccond set of "bumps" in the hop up unit. Seems to fit nice now. I find the nozzle sticks in the hop up a bit now so the seal is really good with the modify rubber.
Had to head out so ill test fire tommorow. Hopefully it works cause the threadz on the front of the reciver (the front 2 threads) wer stripped a bit the first time i removed the outter so i dont wanna open it again it was a pain lol.
Anyone else had the stripped right outta the box issue?
Anyone got a line on se 416 uppers?

[misomalu]

Originally Posted by Socks

if i was looking for a good store or site to source all the parts to build a second complete upper assembly for cqb, where would i go? Most places im seeing dont cater to the gbbr market at all

Ehobbyasia is good for that, however, it's much harder to build a WE from the ground up, as there is a very limited number of parts available for them, goo luck!

[Disco_Dante]

Originally Posted by Socks

if i was looking for a good store or site to source all the parts to build a second complete upper assembly for cqb, where would i go? Most places im seeing dont cater to the gbbr market at all

Airsoftglobal is my favourite place for WE bits. They have an excellent selection, included upper receivers with rails or integrated carry handles.

[Deadpool]

Originally Posted by misomalu

Ehobbyasia is good for that, however, it's much harder to build a WE from the ground up, as there is a very limited number of parts available for them, goo luck!

Well, you must not be living on the same planet as I am.

2 minutes of google-fu and a bit of searching gets you upper receivers, bolt assemblies, outer barrels and front ends galore.

[Hectic]

What about a 416 upper? If you find that (just a stock replacement one) then your google fu is stronger then mine lol

[Deadpool]

Originally Posted by Hectic

What about a 416 upper? If you find that (just a stock replacement one) then your google fu is stronger then mine lol

Ask and you shall receive: http://www.airsoft-entrepot.fr/upper...16-39.z.fr.htm

Or this: http://www.airsoft-developpement.com...022-black.html

Or maybe this is more to your liking: http://www.blowbackarmory.net/produc...68upperkit.htm

[Hectic]

Nice!
Now if WE doesnt help me i have a source or three lol.
Anyone ever deal with WEtech?
The threads on my upper wer stripped right outta the box. I was able to get it apart and back together to swap the rubber and inner but im sure i wont be able to do it too many more times without it becoming totally fubar. I sent them an email via their contact form hopefully they will ask for proof its new snd either give me an upper cheap or free. But im not holding my breath lol.

[Deadpool]

I'm not even sure if WE responds to emails. (I'm still awaiting a responce from 2 years ago) Your best bet is going through a distributor to get parts.

[ARC-74]

Originally Posted by Deadpool

I'm not even sure if WE responds to emails. (I'm still awaiting a responce from 2 years ago) Your best bet is going through a distributor to get parts.

Back in February I had emailed WE inquiring about getting a replacement part for a pistol. They did actually reply to say that they were wholesale inquiry only, but they did tell me the following.

"For individual purchase of original WE products, spare parts & special
items, please try contacting info@airsoft123.com (www.airsoft123.com is
one of our trusted official dealers). They can special-order WE products
& replacement parts for you with quick turnaround time."

[camerashot]

has anyone tried the i-hop on there we guns?
ra-tech is selling this for the we gbb
http://en.ratech.com.tw/english/inde...=27&Itemid=119

does anyone find the 6.03 barrel more accurate than the ra tech 6.01?

[turok_t]

Originally Posted by Deadpool

I'm not even sure if WE responds to emails. (I'm still awaiting a responce from 2 years ago) Your best bet is going through a distributor to get parts.

I think we all know who the WE distributor is in Canada If anyone needs spare WE M4/M16, PDW, SCAR, 416 parts, please PM me... You will be surprised what I have for you... Im sure many users who have contacted me for parts can attest to this

[m102404]

To be honest...the stock barrel is decent enough for most ranges. I'd err on the side of a 6.04/6.03 vs. a 6.01.

Aside from junk that will come in via the mag an AEG is pretty much a closed-dry system. Crap can come into a GBBR via the mag too...but also the feed lips are pretty hard/sharp and can nick BBs, open bolts are...open to whatever, and the temperature changes from the gas can cause condensation on the inner barrel.

In a clean shoot-in-your-basement type setup there's probably no issue...but in field games where you're mucking about and it always seems to rain too tight of a bore will just increase the risk of jams.

[Hectic]

Stripped npas?
I think either my npas or ghe tool is stripped.
If i try and adjust it the tool seems to slip but if i put the tool on an allen key it doesnt slip. So is the npas itself stripped?
Anyone had this issue befor?

[Socks]

Originally Posted by Disco_Dante

Airsoftglobal is my favourite place for WE bits. They have an excellent selection, included upper receivers with rails or integrated carry handles.

Originally Posted by misomalu

Ehobbyasia is good for that, however, it's much harder to build a WE from the ground up, as there is a very limited number of parts available for them, goo luck!

Thanks guys! Ill look into these