|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 1st, 2013, 00:03 | #1 |
TM FN 5-7 Shoots...weird
So I traded another pistol for this one a while ago.
Was working great, up until now. It shoots...kinda, shooting the pistol right side up it uses 50% power but when you shoot UPSIDE DOWN it shoots perfect. Anyone know what's wrong? Thanks, teck
__________________
PERKS: -One shot, one kill -Pack rat -Tourette syndrome sufferer -Phone addict -Tunnel rat -Sculptor -Chairsofter -I Mean Business -Quadruple Bypass |
|
May 2nd, 2013, 17:28 | #2 |
"bb bukakke" KING!
|
rightside up put upward pressure on the mag... shoot perfect?
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
May 2nd, 2013, 17:43 | #4 |
It means your loading nozzle and magazine aren't making a proper seal. Or that your magazine isn't seating up into the gun fully. Try putting some silicon on the rubber on the top of your magazine.
Also check if your nozzle has a lot of play and movement in its housing... Not sure what else to tell you! Good luck |
|
May 2nd, 2013, 17:44 | #5 |
"bb bukakke" KING!
|
means the mag isn't seating very well... could be a worn mag catch, could be swollen mag seals that aren't getting an air tight seal because of uneven mating surfaces.. too much lube oil (or lube oil in general with the wrong chemicals) could cause that. Maybe something else is broken.. you'll have to pull it apart and inspect that area along with the mag catch to see what's worn.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
Bookmarks |
|
|