|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 21st, 2013, 20:01
|
#1 |
|
To grease or to oil, that is the question.
I've just finished putting together my G&P SR16 CQB challenge kit, everything is good to go but I was wondering, about the bolt carrier, what kind of lubricant should I use for it? I have a steel ra-tech bolt inside the aluminum body, I would think I should be using some sort of grease on the outside of the bolt to smoothen out the movement, I assume silicone oil is too light for metal on metal contact. And as for the trigger/hammer/sear what should i use (if anything) to lubricate this? Right now the internals are dry (no lube anywhere) and I have yet to fire it before I clear this up.
Thank you, and have fun shooting each other. |
|
|
|
March 21st, 2013, 20:06
|
#2 | ||
|
ksuechuc
|
I used graphite powder and white lithium on all metal on metal contact points with all my GBB/Rs
__________________
Quote:
Quote:
|
||
|
|
|
|
March 21st, 2013, 20:08
|
#3 | ||
|
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
I think some folks like the super lube for metal on metal points.
There are alot of other options tho. I even heard of a "wax" type lube that provides got friction reduction on metal to metal contact points but doesnt leave gunk that traps dust n grit (i think illusion was talkin about it)
__________________
Quote:
Quote:
FinchFieldAirsoft |
||
|
|
|
|
March 21st, 2013, 21:48
|
#4 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
wax, graphite, synthetic grease
oil doesn't necessarily get thick and gunky, but it does run and wash out quickly |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
