Upgrades? Rof?

[x0xMickx0x]

I was thinking over this setup...
- Lonex A1 RED Motor
- Lonex Standard Ratio Gears
- M130 Spring
Stock Everything Else (MAX Version)

What will be my ROF ruffly and are there anything add-ons?

[ThunderCactus]

what gun, what battery, do you have a mosfet, stock or upgraded wiring?

[Stealth]

Mostly dependent on the battery you're running. Could be anywhere from almost 40rps down to 15rps LOL.

[Andre_1999]

With the lack of information given, You probably want a fast ROF with an FPS of 400+ and with the setup you're looking at you'd get probably *17 RPS, more or less. With those you need a good battery that can pull a stiff spring and a battery that can pull of a fast ROF.

Also when you said ''MAX'' are those the G&Gs? I thought they have m120s in them?

[lurkingknight]

if it's a g&g max gun it could be anything from a 130-150 spring.

I don't think you need to change the gears anyhow... 18:1 is the standard ratio in almost every gun.. and the lonex standard ratio gearset is 18:1. If it ain't broke...

I was getting a pretty silly rof on a 100 spring g&g max m14 with a 9.6v 4000mah battery... close to 20 I think... I was pretty impressed for a stock gun.

you're going to need a bigass discharge lipo to get above 20 on 18:1 gears through. I think my p90 maxed out at 20~ or so before I did the silly things to it. Back then it had standard gears and a guarder infinite torque motor. 20c 11.1v lipo.

[Moonschlagen]

I manage 21rps on standard 18:1 gears using a beast 50C 11.1v lipo on a basically stock gun. So the main thing you want is the best battery possible. Check out Stealth's store for some good options.

[x0xMickx0x]

Im using a 9.6v im not really into the lipos though and my gun now is slow the gears are high torque so around 32:1, it has lower resistance wiring. and its a GR16

[Stealth]

I think you'd be around 13-15rps.
What's your capacity on your 9.6v battery?

[x0xMickx0x]

Well would the 13:1 Lonex pull a M120? and its a 1600mah. Im getting a 2000 soon though