|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 15th, 2012, 14:33
|
#1 |
|
WE M4 AEG Bolt Catch Problem (Help)
I had to rear wire my gearbox so that I can install my ris rail. After re-wiring I closed my gear box and installed everything back into place. However when I tried the bolt catch it just wasn't working. I pull the charging handle, the dust cover opens and the bolt slips back and holds into place. When I press the bolt release it doesn't work anymore. So I took the gun apart, and gearbox, I then realized that the little spring that works with the lever was messed up. Is there anyway to fix this?
|
|
|
|
|
December 15th, 2012, 14:46
|
#2 |
|
Get a new spring?
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
December 15th, 2012, 14:57
|
#3 |
|
I have thought about that, but it doesn't seem like a standard spring or something I can even find online. Here are some pictures just to make sure were all on the same page about what I'm talking about.
  
|
|
|
|
|
|
December 15th, 2012, 16:06
|
#4 |
|
If it's not common, then you'll have to make it. Try emailing WE and asking them to sell you a spare.
__________________
Please email me as I'm not on ASC too often.  Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
|
|
|
December 17th, 2012, 10:47
|
#5 |
|
I pulled out the lever that passed through the gearbox, which by doing so ripping out the spring. Problem solved... There is no real issue that appeared from doing so.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
