sooooo I ended up getting my first kwa m93r replaced by the shop... only to have the same problem 2 months later with the replacement no longer under warranty.
My selector bar has snapped clean off and the "Semi-auto fix" is not working for me. Attached is two pictures of the internals of the gun and my attempt to make a longer version of the mod due to the selector bar no longer catching the post.
http://is100.imagesocket.com/images/...41900-xjci.JPG
http://is100.imagesocket.com/images/...41899-5izh.JPG
I had attempted to glue a credit card slab onto the side of the post as some people in the forum had said this will fix it. (outlined in this thread here:
http://www.airsoftcanada.com/showthread.php?t=143056)
here is a pic of somebody elses's mod they did to fix it:
http://www.airsoftcanada.com/attachm...8&d=1343452491
if you look closely, the selector bar has clean snapped off in my photos, the little bit protruding silver bit out above the post is gone. I tried a method outlined on forums involving gluing a credit card to that post to fix it, and it seemed to fix some peoples guns but they didnt have their selector bar broken.
I was wondering if you guys had any ideas or if you knew somebody who could make that part with a stronger metal? I am not interested in simply purchasing a replacement of the same metal, this is the 2nd m93r that has broken on me in the exact same fashion, so I know that KWA's part is garbage.
http://kwausa.com/files/2413/0565/24...V01_M93RII.jpg The part is #61.
Sorry for the long post, thought more details might help. Let me know if you can help, id gladly pay for some assistance.
November 2nd, 2012, 20:38
