|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 6th, 2012, 00:07
|
#1 |
|
problem with my new ptw
i buy a used ptw, is running ok
after a regreased the gear, the gearbox run a few time and after nothing. I clean the sector gear and the sensor, and no more appent. The led on the board flash one time when i pass to semi and when i pull the trigger the led blinking. Idon't know what to do thanks in advance Sorry for my poor english, normaly i speak frensh
__________________
Lewis 
|
|
|
|
September 6th, 2012, 00:12
|
#2 |
|
continues blinking light means motor issues
__________________
Forums Rules, Learn em, Love em Follow em I have gear and gun rentals available at all Team SWATT hosted games in Brooks, Alberta |
|
|
|
|
|
September 7th, 2012, 00:14
|
#3 |
|
As freelancer said, the LED flashing means its the motor. If the electronics has issues, the gun will not cycle at all.
|
|
|
|
|
September 7th, 2012, 00:23
|
#4 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Are you using an 11.1v lipo? Cause that usually kills un-modified motors in one game =/
|
|
|
|
|
September 7th, 2012, 00:25
|
#5 | |
|
Quote:
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
|
October 8th, 2012, 20:50
|
#6 | |
|
Banned
|
Quote:
|
|
|
|
|
|
October 8th, 2012, 20:58
|
#7 |
|
Personal Mule.....PM for rates!
|
when it does cycle, does it do a half cycle then de-cocks the cyclinder?
__________________
"Those who have long enjoyed such privileges as we enjoy, forget in time that men have died to win them" Franklin D. Roosevelt |
|
|
|
|
October 10th, 2012, 03:44
|
#8 | |
|
Quote:
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
|
October 10th, 2012, 13:58
|
#9 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
if you have a problem with grease splatter on the optics, you're not using a thick enough grease!
I may have to tear down my mechbox soon, I'm going to try regreasing the gears lightly with premalube. It's not sap, but it sticks pretty damn well in our CNC lathe chuck at 4000rpm |
|
|
|
|
October 10th, 2012, 14:14
|
#10 |
|
In most cases from what I've seen is new PTW tend to get overzealous in greasing their TW, I was told by the PTW guru himself that all you need a small coating not a glob, if you cycle your gears and there is a residue on the sides that means it's too much grease There should not be any residue at all.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
