G&G M16A3 max review

THe_Silencer · August 22nd, 2011, 13:19

From my experience, G&G makes some of the weakest gears on the market. Even the gears on their "high end" guns are prone to stripping even before the piston gets a chance to. You should downgrade the FPS if you want it to last for as long as possible.

Neved4eyes · August 24th, 2011, 11:16

Quote:

Originally Posted by THe_Silencer

From my experience, G&G makes some of the weakest gears on the market. Even the gears on their "high end" guns are prone to stripping even before the piston gets a chance to. You should downgrade the FPS if you want it to last for as long as possible.

Actually, I did just that. The gun is now shooting 400fps with .25's and around 440 with .2's. That way I'm within field limits and also keeping some stress off my gun.

THe_Silencer · August 24th, 2011, 11:28

Quote:

Originally Posted by Neved4eyes

Actually, I did just that. The gun is now shooting 400fps with .25's and around 440 with .2's. That way I'm within field limits and also keeping some stress off my gun.

Actually, when I said downgrade, I was thinking more along the lines of 400 FPS or less on .2s. I would not trust the stock innards for anything higher than 400 FPS. Keep us updated on how well your gun performs at the current FPS.

Toxicrider · August 24th, 2011, 14:05

Glad you are enjoying the gun Neved!! Do know you have some pretty good range with it!! If you do have an issue let me know, know a great gun doc local to me that did some work recently for me. Highly recommend him!! You do need to get good optics on the gun... Oh wait if I am on the other team I want you to be shooting over iron sights!!

Neved4eyes · August 30th, 2011, 11:07

Quote:

Originally Posted by Toxicrider

Glad you are enjoying the gun Neved!! Do know you have some pretty good range with it!! If you do have an issue let me know, know a great gun doc local to me that did some work recently for me. Highly recommend him!! You do need to get good optics on the gun... Oh wait if I am on the other team I want you to be shooting over iron sights!!

LOL Don't you worry, I picked up a nice 3x9 power scope! I will be shooting accurate now!

Nocturnal · August 31st, 2011, 11:22

400fps with .25g bbs? with a full length M16- 509mm innerbarrel.....
thats going to hurt..

Toxicrider · August 31st, 2011, 17:07

Quote:

Originally Posted by Nocturnal

400fps with .25g bbs? with a full length M16- 509mm innerbarrel.....
thats going to hurt..

Got hit by it a couple of weeks ago. Stings a bit, but not enough to write home about.

mills0 · April 27th, 2012, 19:50

Hey Guys, bit of a necro post but thought I'd give my two cents. A lot of the guys in our club here have been rocking g&g max guns with the downgrade spring and aside some some very minor issues (the buffer tubes screw in and can get a bit loose, and we've had to pinch the motor connectors a bit tighter) they've been great to use.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 22nd, 2011, 13:19	#16
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	From my experience, G&G makes some of the weakest gears on the market. Even the gears on their "high end" guns are prone to stripping even before the piston gets a chance to. You should downgrade the FPS if you want it to last for as long as possible. __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

August 31st, 2011, 11:22	#21
Nocturnal oO? Trader rating Join Date: Feb 2004 Location: Stouffville, ON	400fps with .25g bbs? with a full length M16- 509mm innerbarrel..... thats going to hurt.. __________________ *"SI VIS PACEM, PARA BELLUM"*

August 24th, 2011, 14:05	#19
Toxicrider Trader rating Join Date: Mar 2011 Location: Milton, On	Glad you are enjoying the gun Neved!! Do know you have some pretty good range with it!! If you do have an issue let me know, know a great gun doc local to me that did some work recently for me. Highly recommend him!! You do need to get good optics on the gun... Oh wait if I am on the other team I want you to be shooting over iron sights!!

April 27th, 2012, 19:50	#23
mills0 Trader rating Join Date: Mar 2009 Location: Brandon, Manitoba	Hey Guys, bit of a necro post but thought I'd give my two cents. A lot of the guys in our club here have been rocking g&g max guns with the downgrade spring and aside some some very minor issues (the buffer tubes screw in and can get a bit loose, and we've had to pinch the motor connectors a bit tighter) they've been great to use.

G&G M16A3 max review

Reviews