Glock Thread!

Mitchell12 · September 24th, 2011, 14:54

Quote:

Originally Posted by ratnest

yes it will fit on the rail, but it's way to long. it sticks of the front because it's the length of a g17

Think the front part will have proper clearance for the barrel? I may still get one and mod it if the front will work.

ratnest · September 24th, 2011, 18:08

The kjw rail seems thicker than the ksc one, it was a bit harder to get on. With a threaded barrel on my 32c the barrel lines up perfectly with the strike face.

Those are just basic tm 25 round mags with. +2 floor Plate. And a wider mag well on the gun. Magpul floor plates are nicer, but I have them on my 32c and wanted a different look.

cellulose · October 9th, 2011, 02:18

Guarder frames on both Glocks

ShadowNet · October 15th, 2011, 22:26

No BS Tokyo Marui Glock 17

PGC aluminium slide and threaded barrel
6.03 tightbore
Gunsmodify extended slide release
steel mag catch
Guarder 150% recoil spring

Jcotter · November 13th, 2011, 18:53

Here's a few of my KSC 18C

wranglerdave · December 6th, 2011, 01:43

My TM G26, painted the lower tonight.

My first post here, been lurking for ages.

cadpat_tact · December 11th, 2011, 01:19

Got my baby in the mail yesterday, thanks to Cottoni for my first GBB!

_DSC2781b.jpg
_DSC2788b.jpg

frackz · December 21st, 2011, 20:28

Glocks are just sexy

Freeze · December 21st, 2011, 22:44

I swear if someone shows up with a full metal glock, I'm going to hit them with a friggen block.
GLOCKS FOR THE WIN! Full Metals ones FOR THE LOSE!

bshantz · December 23rd, 2011, 12:54

TM G18c, PGC Metal slide with threaded metal barrel, Guarder 150 recoil spring, hammer spring
<Anyone with experience with the PGC Metal Slide and Barrel installation and maintenance, can you please PM me. I have a few
questions about what to upgrade to keep up with all that weight>
Just threw a cheapo MX3 replica on until my X300 comes in the mail

Thanks to Cottoni for the TM G18c and AirsoftParts.ca for the PGC Slide and Barrel!

Karma_ · December 23rd, 2011, 13:21

Nice

Amos · December 23rd, 2011, 13:30

Looking for a metal slide like the G23's hybrid design for the Marui G17...

Something like this;

http://www.wgcshop.com/wgc2008/main/...ck&catid=&cat=

Anyone know where a place where I could find one?

spartan117 · December 23rd, 2011, 18:16

Quote:

Originally Posted by bshantz

Very nice dude. I'm waiting for my X300 as well.

ILLusion · December 23rd, 2011, 19:54

Quote:

Originally Posted by Amos

Looking for a metal slide like the G23's hybrid design for the Marui G17...

Something like this;

http://www.wgcshop.com/wgc2008/main/...ck&catid=&cat=

Anyone know where a place where I could find one?

ILLusion Kinetics?

http://www.pbase.com/image/115942635

six4 · December 26th, 2011, 18:58

No pics of my kj Glockbut how a video?

http://youtu.be/anzFYhOdRC0

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 24th, 2011, 18:08	#272
ratnest Trader rating Join Date: Mar 2009 Location: vanier	The kjw rail seems thicker than the ksc one, it was a bit harder to get on. With a threaded barrel on my 32c the barrel lines up perfectly with the strike face. Those are just basic tm 25 round mags with. +2 floor Plate. And a wider mag well on the gun. Magpul floor plates are nicer, but I have them on my 32c and wanted a different look. Last edited by ratnest; September 24th, 2011 at 18:13..

October 9th, 2011, 02:18	#273
cellulose formerly aBseNtceLL Trader rating Join Date: Mar 2009 Location: Winnipeg, MB	Guarder frames on both Glocks __________________ Follow me on Tumblr: http://m-sean.tumblr.com Last edited by cellulose; October 22nd, 2011 at 13:06..

October 15th, 2011, 22:26	#274
ShadowNet Trader rating Join Date: Mar 2008	No BS Tokyo Marui Glock 17 PGC aluminium slide and threaded barrel 6.03 tightbore Gunsmodify extended slide release steel mag catch Guarder 150% recoil spring __________________ Last edited by ShadowNet; October 16th, 2011 at 15:57..

November 13th, 2011, 18:53	#275
Jcotter Trader rating Join Date: Mar 2011 Location: Brookfield NS	Here's a few of my KSC 18C

December 6th, 2011, 01:43	#276
wranglerdave Trader rating Join Date: Dec 2011	My TM G26, painted the lower tonight. My first post here, been lurking for ages.

December 11th, 2011, 01:19	#277
cadpat_tact Trader rating Join Date: Apr 2007 Location: Hamilton, ON	Got my baby in the mail yesterday, thanks to Cottoni for my first GBB! _DSC2781b.jpg _DSC2788b.jpg

December 21st, 2011, 20:28	#278
frackz $frackz's Avatar$ Trader rating Join Date: Dec 2011 Location: Toronto	Glocks are just sexy
$frackz is offline$

December 21st, 2011, 22:44	#279
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	I swear if someone shows up with a full metal glock, I'm going to hit them with a friggen block. GLOCKS FOR THE WIN! Full Metals ones FOR THE LOSE! __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

December 23rd, 2011, 12:54	#280
bshantz Trader rating Join Date: Feb 2010 Location: Calgary	TM G18c, PGC Metal slide with threaded metal barrel, Guarder 150 recoil spring, hammer spring <Anyone with experience with the PGC Metal Slide and Barrel installation and maintenance, can you please PM me. I have a few questions about what to upgrade to keep up with all that weight> Just threw a cheapo MX3 replica on until my X300 comes in the mail Thanks to Cottoni for the TM G18c and AirsoftParts.ca for the PGC Slide and Barrel! __________________ ----- "Weakness of attitude becomes weakness of character." Last edited by bshantz; December 23rd, 2011 at 13:26..

December 23rd, 2011, 13:21	#281
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	Nice __________________ *The cost of being legit is high*

December 23rd, 2011, 13:30	#282
Amos Trader rating Join Date: Aug 2006 Location: Japan	Looking for a metal slide like the G23's hybrid design for the Marui G17... Something like this; http://www.wgcshop.com/wgc2008/main/...ck&catid=&cat= Anyone know where a place where I could find one? __________________ Custom Builds: FA3674U Krinkov G3SD6

December 26th, 2011, 18:58	#285
six4 Trader rating Join Date: Jan 2006 Location: mission b.c.	No pics of my kj Glockbut how a video? http://youtu.be/anzFYhOdRC0

Glock Thread!

Airsoft Media