|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 9th, 2011, 23:42
|
#1 |
|
pɹıq spɹɐʍʞɔɐq
|
TM MK-23 Mag
How the #%*^%#!# do you remove the butt plate on a TM MK-23 Mag? It must be really stupid, but I can't figure it out. I removed the two bottom pins and the top pins, and also removed the valve.
|
|
|
|
September 9th, 2011, 23:57
|
#2 |
|
Two pins are out? Now pull/pry really hard.
|
|
|
|
|
September 10th, 2011, 00:38
|
#3 |
|
pɹıq spɹɐʍʞɔɐq
|
Tried even with a screwdriver, won't move
|
|
|
|
|
September 10th, 2011, 00:51
|
#4 | |
|
did you drill the 3rd pin? theres 2 knock out pins, and then a "3rd pin" thats only on one side, you basically have to drill it .. just enough for the baseplate to clear
__________________
Vancouver Island Gun Doc, custom builder. Leader - M.E.R.C. multi enviroment recon CAVALRY Quote:
|
|
|
|
|
|
September 10th, 2011, 01:01
|
#5 | ||
|
Suburban Gun Runner
|
Quote:
__________________
Quote:
|
||
|
|
|
|
September 10th, 2011, 06:47
|
#6 |
|
aka coachster
|
Yup! 3rd half pin must be drilled out.
|
|
|
|
|
September 10th, 2011, 09:09
|
#7 |
|
pɹıq spɹɐʍʞɔɐq
|
Ah! I found it weird that this pin was not showing on the other side! Thanks!
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
