KWA M4A1 Barely Shooting?

The DMCA · September 25th, 2010, 10:58

i had charged the battery for 9 hours the first time after getting it, but when i went to shoot it the BB's only went about 4 or 5 feet... i tried charging it again and still the same result. i know nothing about the internals of the gun, any help will be greatly appreciated!

Brockavich · September 26th, 2010, 17:06

Your hopup might be screwed if that gun even has one... Bottom line I think it's safe to say its something internal and you'll need a gun doc for that. :/

audi_bhoy · September 26th, 2010, 19:29

Do you hear the motor and gears spin normaly? Do you hear strange sounds when shooting? Does the motor spins for a long time before you hear the piston slam and the bb goes out?

VooDooPeteK · September 27th, 2010, 03:35

I would suggest looking up a local gun doc and have them look at it, or pick up a new hop up rubber and try that out.

Blitzed · September 27th, 2010, 03:46

Could be a compression issue?

venture · September 27th, 2010, 04:20

dial your hopup to zero to rule that out. If it still doesn't shoot, then you probably have a broken cylinder head. I have read that it is quite common with KWA's. I have only worked on one KWA personally. Its problem: bbs only shooting 5 or 10 feet. solution: broken cylinder head, replaced cylinder head.

The DMCA · September 27th, 2010, 20:40

It was an issue with the Hop-Up. thank you, you saved me a lot of time and heartache!

Wrath144 · September 27th, 2010, 23:30

If its a KWA, its probably a compatibility issue with your mags.
What type of mag were you using it with?

venture · September 28th, 2010, 02:15

Your welcome. Glad it was the cheap solution!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 25th, 2010, 10:58	#1
The DMCA Trader rating Join Date: Sep 2010 Location: Oakville, Ontario	KWA M4A1 Barely Shooting? i had charged the battery for 9 hours the first time after getting it, but when i went to shoot it the BB's only went about 4 or 5 feet... i tried charging it again and still the same result. i know nothing about the internals of the gun, any help will be greatly appreciated! __________________

September 26th, 2010, 17:06	#2
Brockavich Trader rating Join Date: Jan 2009 Location: Winnipeg, MB	Your hopup might be screwed if that gun even has one... Bottom line I think it's safe to say its something internal and you'll need a gun doc for that. :/ __________________ Let's get out and pew pew!

September 27th, 2010, 03:35	#4
VooDooPeteK Trader rating Join Date: Feb 2010 Location: Thorold, Ont	I would suggest looking up a local gun doc and have them look at it, or pick up a new hop up rubber and try that out. __________________ http://www.gorillaairsoftradio.com/ Great Airsoft Podcast Gun tech work, Parts, Upgrades and anything else you might need http://www.fortythievesmcnation.com/ Support your local 1%er

September 26th, 2010, 19:29	#3
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Do you hear the motor and gears spin normaly? Do you hear strange sounds when shooting? Does the motor spins for a long time before you hear the piston slam and the bb goes out?

September 27th, 2010, 03:46	#5
Blitzed Trader rating Join Date: Sep 2009 Location: St. Albert, AB	Could be a compression issue?

September 27th, 2010, 04:20	#6
venture Trader rating Join Date: Jun 2005 Location: Halifax	dial your hopup to zero to rule that out. If it still doesn't shoot, then you probably have a broken cylinder head. I have read that it is quite common with KWA's. I have only worked on one KWA personally. Its problem: bbs only shooting 5 or 10 feet. solution: broken cylinder head, replaced cylinder head. __________________ Visit us at :www.ventureairsoft.ca

September 27th, 2010, 20:40	#7
The DMCA Trader rating Join Date: Sep 2010 Location: Oakville, Ontario	It was an issue with the Hop-Up. thank you, you saved me a lot of time and heartache! __________________

September 27th, 2010, 23:30	#8
Wrath144 formerly steyr Trader rating Join Date: Sep 2005 Location: Winnipeg, Manitoba	If its a KWA, its probably a compatibility issue with your mags. What type of mag were you using it with?

September 28th, 2010, 02:15	#9
venture Trader rating Join Date: Jun 2005 Location: Halifax	Your welcome. Glad it was the cheap solution! __________________ Visit us at :www.ventureairsoft.ca

KWA M4A1 Barely Shooting?

Doctor's Corner