Sorbo Pad

[coach]

Originally Posted by ScooterVauto

the enhanced one does..

that's not sorbothane. where does it say that the modify enhanced heads come with sorbo pads?

Originally Posted by BobbyDangerous

What would happen if you had a smaller barrel but got a cylinder with no port in it?

BB will exit the barrel before the piston has achieved full speed and or come close to contacting the cylinder head.

[ThunderCactus]

meaning either small to big loss of FPS, or if you have a really long barrel, you could have 2 BB's in the barrel which REALLY sucks and causes pistons to strip lol

[BobbyDangerous]

So better to stick with the 300mm to 450 mm cylinder. My barrel is 363mm

[ScooterVauto]

as i understand it unless you go over 500 mm the stock cylinder is very effective.
going smaller i would assume no cylinder change is needed.
do what i did. start here
Greylocks Smart upgrades thread

[BobbyDangerous]

I went bigger the stock barrel is smaller it was a weird number like 357 or something like that

[ThunderCactus]

if a full cylinder was very effective for everything under 500mm, they wouldn't make ported cylinders....

[BobbyDangerous]

K that clears everything up.. Thanx guys

[ScooterVauto]

Originally Posted by coachster

that's not sorbothane. where does it say that the modify enhanced heads come with sorbo pads? .

I stand corrected Sir.
it is not a sorbo pad, it is simply a thin rubber pad factory installed on the cylinder head.
So no it doesnt have a sorbo pad but it does have rubber padding.
be it not a sorbo pad, it does still have more then stock

[coach]

S'all good. Thought I missed something or Jugglez was holding back on me. lol.

Most cylinder heads have a thin rubber pad. At least I haven't seen one without or I just didn't notice while throwing the stock outs out.