How to fix my airsoft revolver

[Supermoto101]

Hey, I have colt python .357 magnum gas revolver that was spraying gas every where when I was trying to fill it up the correct way. I opened it up to try to fix it but couldn't and I'm now unable to put it back together because of all of the little pieces.If you are able to send me a picture of what the inside is suppose to look like or anything that will help me please let me know.
Thanks

[Pliskin]

What brand? KWC?

[Supermoto101]

Yes its a KWC.

[Pliskin]

The gas goes into the bottom of the handle. The gas reservoir is located inside the grip, and can be accessed easily by just taking out the screw in the pistols grip. So you take the can, and stick it under the handle, with the gun upside down of course, to help load it easier. This gun in particular is a little tricky to load, you have to make sure to line it up perfectly, and even then you leak a lot of gas while loading. Overtime however, you will get better and better at it, until you lose barely any gas. Or you could use the methods that some people recommend, regarding modifying your gun so that gas will not leak out. Once it is full of gas you are ready to shoot.

Taken from http://pointblaink.tripod.com/mafreviewsection/id6.html

Does that sound like your problem? If so, it's just excess gas, as far as I know.

EDIT: My bad, noticed you need a re-assembly guide. Hold a few, I'll search.

EDIT2: Looking on google, and pretty much everywhere I know of, and I just can't find a link that still leads to the KWC .357. Sorry mate.

EDIT3: This should also be posted in Doctors Corner.