Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

P90 400 FPS

:

Upgrades & Modifications

Reply
 
Thread Tools
Old June 20th, 2007, 02:23   #1
DoctorDeath
 
DoctorDeath's Avatar
 
Join Date: Nov 2004
Location: St. John's / Halifax
P90 400 FPS

Ok I am buying a new P90 that is shooting around 400 FPS. The only upgrades to the gun so far are the spring and metal bushings. Will this setup last, or will other parts need to be replaced in order to ensure reliability with the higher tension spring? Anyone else use this setup with success? Thanks.

FYI - I don't shoot more than 2 second bursts and usually go through less than 1000 rounds a day, so I don't put much stress on the motor/gearbox.
__________________
The Doctor is in.
DoctorDeath is offline   Reply With Quote
Old June 20th, 2007, 19:02   #2
LUTNIT
 
Join Date: Dec 2005
Location: Ottawa
I had a 400fps (chronied 405-410fps) P90 with only metal bushings and spring upgrades. Lasted around 2-3k rnds with the first owner, another 5-6k with me, and then I sold it. The ver.6 mechbox is one of the strongest if not the strongest. Piston may wear down faster but TM pistons are usually quite good, as are their gears. It should be fine for a good while at least.
LUTNIT is offline   Reply With Quote
Old June 18th, 2010, 13:29   #3
GWoolfrey
 
GWoolfrey's Avatar
 
Join Date: Jun 2010
Location: St.John's, Newfoundland, Canada
Quote:
Originally Posted by DoctorDeath View Post
Ok I am buying a new P90 that is shooting around 400 FPS. The only upgrades to the gun so far are the spring and metal bushings. Will this setup last, or will other parts need to be replaced in order to ensure reliability with the higher tension spring? Anyone else use this setup with success? Thanks.

FYI - I don't shoot more than 2 second bursts and usually go through less than 1000 rounds a day, so I don't put much stress on the motor/gearbox.
Sweet... where did you get it? Shootsoft.ca screwed me so I have to order from someone else.. still waiting to get verf from this site.. anyday now.
GWoolfrey is offline   Reply With Quote
Old June 18th, 2010, 13:49   #4
chaosnemesis
 
chaosnemesis's Avatar
 
Join Date: Nov 2008
Location: Toronto
i'm afraid he can't answer that until you're verified. My tm P90 is still using stock gears. Althoug it's only shooting at 380. After 5k rounds the only items replaced were the tappet plate and the piston.
chaosnemesis is offline   Reply With Quote
Old June 20th, 2010, 10:06   #5
Guardian
 
Guardian's Avatar
 
Join Date: Aug 2004
Location: Ajax-Pickering (GTA)
I find the sector gear does tend to wear with this set-up. Inspect it before season start. Fortunately they aren't hard to come by.
__________________


"Sex is one of the 9 reasons for reincarnation, the other 8 are unimportant." Henry Miller

Guardian’s airsoft projects @ http://www3.sympatico.ca/aftershock/
Guardian is offline   Reply With Quote
Old June 20th, 2010, 10:08   #6
kalnaren
 
kalnaren's Avatar
 
Join Date: Dec 2006
Location: Midland, Ontario
A bearing spring guide wouldn't hurt if it doesn't already have one. I'd check the wear on the piston too.
__________________

Quote:
"Someone in a Prius tried to race me at a stop sign the other day. I couldn't believe it. I had him for the first 100 feet or so but I can only walk so fast."
kalnaren is offline   Reply With Quote
Old June 20th, 2010, 10:30   #7
Daiviet
Captain Sunshine
 
Daiviet's Avatar
 
Join Date: Aug 2006
Quote:
Originally Posted by GWoolfrey View Post
Sweet... where did you get it? Shootsoft.ca screwed me so I have to order from someone else.. still waiting to get verf from this site.. anyday now.
Necro...
Daiviet is offline   Reply With Quote
Old June 20th, 2010, 16:21   #8
kalnaren
 
kalnaren's Avatar
 
Join Date: Dec 2006
Location: Midland, Ontario
Quote:
Originally Posted by Daiviet View Post
Necro...
Oops.

Me = fail.
__________________

Quote:
"Someone in a Prius tried to race me at a stop sign the other day. I couldn't believe it. I had him for the first 100 feet or so but I can only walk so fast."
kalnaren is offline   Reply With Quote
Old June 20th, 2010, 23:20   #9
Guardian
 
Guardian's Avatar
 
Join Date: Aug 2004
Location: Ajax-Pickering (GTA)
Quote:
Originally Posted by Daiviet View Post
Necro...
Doh! advice still holds I guess...
__________________


"Sex is one of the 9 reasons for reincarnation, the other 8 are unimportant." Henry Miller

Guardian’s airsoft projects @ http://www3.sympatico.ca/aftershock/
Guardian is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 17:08.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.