|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 18th, 2010, 18:16
|
#1 |
|
m249 mechbox upgrade.
Hey, these are the upgrades i plan on doing to the internals on my A&K m249 saw. What do you guys think, anything else i should include or change.
King arms 11.1volt 2500mah lipo battery Hurricane Aluminum Piston Full Teeth V2/V3 MASK Aluminum Piston Head with Bearing MASK Pro Cylinder Head V3 Modify V2/V3/V6 High Torque Gearset Modify Spring Guide - CA/A&K M249 Mad Bull M120 AEG Upgrade Spring Modify Enhanced Tappet - V3 Modify 7mm Bearing Bushings Modify 8mm Bearing Bushings Guarder Improved Hop-up Set - Black Guarder Infinite Torque-Up Motor - Short G&P AEG Grease Set Let me know what you think.
__________________
Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers |
|
|
|
June 19th, 2010, 00:49
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Use prometheus instead of modify
Get a G&P motor instead of Guarder Use white lithium grease Get your LiPo from hobbyking.com, you can get an 11.1v 4900mah LiPo for 40$ |
|
|
|
|
June 19th, 2010, 01:03
|
#3 | |
|
Suburban Gun Runner
|
If you are gonna use that Lipo get a sector clip to make sure that your gun feeds at that rof. Also, the hop up on the A&K M249 is shite, replace the hop up rubber and use Cruchmeisters pattented hop up nub. Which happens tio be a peice of 18 gauge speaker wire. And make sure you replace the electric switch with this.
http://www.airsoftparts.ca/store2/in...oducts_id=1537
__________________
Quote:
|
|
|
|
|
|
June 19th, 2010, 03:51
|
#4 |
|
|
thanks guys for the input, im also going to get a CA hop-up unit too and that switch.
__________________
Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers |
|
|
|
|
June 19th, 2010, 14:30
|
#5 | ||
|
Quote:
Use any food safe 100% silicon gel/lubricant. Food safe is the key word as it will guarantee that it contains no petroleum distillates. Switch all your modify parts to prometheus for 5-20 dollar price difference makes a gigantic quality difference. Switch the spring to prometheus Don't use that piston you are going to prematurely wear down your gears. Prometheus, Azimuth or Supercore for that high RoF setup. And get a Mosfet otherwise you will be replacing electrical every 3-4 months.
__________________
Do you know what ruins airsoft? (Chair), (Drama), (Air), (Sugar) softers, filthy casuals --- Quote:
WANTED PTW Receiver PRIME, STG, Factory |
||
|
|
|
|
June 19th, 2010, 14:37
|
#6 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
I've worked on dozens of guns and never had any issues with white lithium grease...
But maybe it's because I use high quality prometheus gears that don't disintegrate under normal use lol |
|
|
|
|
June 19th, 2010, 15:10
|
#7 |
|
ARS grease sets ftw lol
|
|
|
|
|
June 19th, 2010, 15:15
|
#8 | |
|
I am using RC grade ceramic grease or lithium grease... never, ever had any issues.
All mechanical parts that have no airseal, white grease. All air-seal parts, a bit if thick 300K wt silicon oil (actually harder than the grease, but it drips... eventually) and some ultra light weight silicon oil (Trinity Royal Oil). Recently I found a tube of electric contacts lube. I am trying it in my MG36 to see if it helps with arcing and cabonizing of the contacts...
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
