TM p226 dissasembly

[SigmanXT]

Ive been looking everywhere for the past hour and a half...
anyone know where i can find a full dissasembly guide for the tm p226?
Im specificly having some trouble with part # p226-3 cant figure our where it goes.
any help at all would be much apreciated.

[Styrak]

Right on ASC actually!

http://tech.airsoftcanada.com/TM/TM%20-%20P226/

I'm pretty familiar with Sigs (trigger/hammer mech and fixing it), but I don't know what that part is for..

[SigmanXT]

Originally Posted by Styrak

Right on ASC actually!

http://tech.airsoftcanada.com/TM/TM%20-%20P226/

I'm pretty familiar with Sigs (trigger/hammer mech and fixing it), but I don't know what that part is for..

yeah its not a part im familiar with either, thanks for the help but i should of been more specific i already have the diagrams and all but im still stuck on this part. I was hoping for somthing more detailed somewhat like a guide, i seriously been looking everywhere.

Still stuck on this, anyone know what this part is for?
(its on diagram1 on styrak's link #p226-3 )

[m102404]

It's a clip that holds the TM front sight on. The front sight is a post that goes through the slide.

Pin/clip the end of the post in place by wedging the clip on the top-inside of the slide.

Look close...you'll figure it out once you see it.

*btw....most disassembly guides skip over this part since you really don't want to take your front sight off much.

*PS. a very small drop of crazy glue once it's in place will help to ensure that it stays there (or else your front sight may go flying....not too common but that clip is all that's holding it on)

[SigmanXT]

Originally Posted by m102404

It's a clip that holds the TM front sight on. The front sight is a post that goes through the slide.

Pin/clip the end of the post in place by wedging the clip on the top-inside of the slide.

Look close...you'll figure it out once you see it.

*btw....most disassembly guides skip over this part since you really don't want to take your front sight off much.

*PS. a very small drop of crazy glue once it's in place will help to ensure that it stays there (or else your front sight may go flying....not too common but that clip is all that's holding it on)

Man that was a pain to get in there lol. Everybody think twice before u decide to take your front sight off haha!

Thanks a million! problem solved!