L96 spring upgrade trouble

[TaktikAirsoft]

Hello

I just bought a 140 spring for my L96. The diameter of the spring is to big by about 2 to 3 mm.

Look at the picture, the bottom spring is the new one,.



What piston and head should I buy? And from where?

Thanks

[Amos]

That looks to be a PDI 13mm spring,

You'll want a PDI cylinder assembly

[TaktikAirsoft]

Any suggestions on where to get this?

Originally Posted by Amos

That looks to be a PDI 13mm spring,

You'll want a PDI cylinder assembly

[Amos]

www.x-fire.org

Or, you can find them cheaper on Redwolf sometimes.

[TaktikAirsoft]

They just sell the complete kit... I just need the piston. ;(

Originally Posted by Amos

www.x-fire.org

Or, you can find them cheaper on Redwolf sometimes.

[Amos]

I'd suggest upgrading to the full kit... It's worth it

[Treefingers]

You can get a Modify piston from airsoftparts that will work, though you'll need to purchase a piston head as well for it.

[TaktikAirsoft]

I just bought PDI piston and head.

I shoot 280 fps????

What did I miss?

[audi_bhoy]

Is the bolt hard to lock back? Changed the 350FPS for the 450FPS spring in my TSD L96, the bolt is much harder to lock with the new spring.

If it isn't harder to lock back, it might be the spring.

[TaktikAirsoft]

Actually it is very smooth to cock, better then before.

This is why I'm worried. Could it be the guide or something else?

Originally Posted by audi_bhoy

Is the bolt hard to lock back? Changed the 350FPS for the 450FPS spring in my TSD L96, the bolt is much harder to lock with the new spring.

If it isn't harder to lock back, it might be the spring.

[audi_bhoy]

Did you put the piston assembly all together by yourself? I saw a big difference between the 350 and 450 Spring when trying to screw in the head of the assembly. (450 being a lot harder to push to be able to screw).

[TaktikAirsoft]

Well for now I changed the hop up and I'm at 415 now... so I'm not going to mess around anymore.

Thanks for the help