M4 Upper recievrer

[Styrak]

Originally Posted by turok_t

It only has the tab for the front, there is no tab at the back for the pin to go through. How come u need a tab at the back anyways?

That metal upper will not work. It is for a G&P-based metal body, not a TM body. It does not have the tabs at the rear for the rear pin to go through. Please educate yourself on the differences before giving out advice.

[turok_t]

Originally Posted by Styrak

That metal upper will not work. It is for a G&P-based metal body, not a TM body. It does not have the tabs at the rear for the rear pin to go through. Please educate yourself on the differences before giving out advice.

I dont know what your problem is man. OP asked me if it has the tab, and im asnwering his question re: an item I posted. I do not know which lower receiver he has, i just simply provided a possible source and information i have. Whether he decides to get it is up to him. I dont know why you always have an acorn up your ass.

[shiftline]

Now now children no fighting!

That first mod with the 1/4 section of the pipe looks promising, i tried super gluing metal tabs with holes but the pressure just snapped it off (metal 1 piece hop up makes a right fit) may have to dremmel it out more some where.

But if the pipe mod doesnt work maybe ill look for a full body.. thanks guys

[TokyoSeven]

Here is another option

http://www.airsoftgi.com/product_inf...oducts_id=5887

It may not be TM however it is a cheap solution to your current issue and should fit. Now I do not believe airsoft GI ships to Canada, you will have to look into that yourself to be certain. If they do not then at least you have another brand that you can attempt to source from another supplier.

[turok_t]

Originally Posted by shiftline

Now now children no fighting!

That first mod with the 1/4 section of the pipe looks promising, i tried super gluing metal tabs with holes but the pressure just snapped it off (metal 1 piece hop up makes a right fit) may have to dremmel it out more some where.

But if the pipe mod doesnt work maybe ill look for a full body.. thanks guys

Its just that hes a damn prick all the time.. You have good intentions to help someone and you offer your advice, and HE always comes in and says shit about ppl. I already bit the bullet last time....

[shiftline]

As the back up plan, the echo1 does anyone know if the rails are the same height as the stock upper receiver?

[Styrak]

Originally Posted by turok_t

I dont know what your problem is man. OP asked me if it has the tab, and im asnwering his question re: an item I posted. I do not know which lower receiver he has, i just simply provided a possible source and information i have. Whether he decides to get it is up to him. I dont know why you always have an acorn up your ass.

He clearly said he has a plastic TM receiver.
That upper will not work. I'm not being an ass, I'm giving correct advice.

[shiftline]

lol, yes its plastic im just trying to keep the cost down as its my spare/second/gf gun lol