|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 28th, 2009, 23:04
|
#1 |
|
Semiauto mechbox Lock-up
Dear sir,
I recently built a customized mechbox for my M16A2. Apparently, the gun fire normly on full auto, but when I fire it on semiauto, it automatically jammed after one single shot. I tried to switch back to auto but there is no trigger response and the motor didn't even make a sound. I pull the motor out and tested it. The motor work just fine. I'm using Guarder IFTU gear for this mechbox. Kindly advice me as of how I can fix this problem |
|
|
|
|
August 28th, 2009, 23:15
|
#2 |
|
aka coachster
|
fully charge battery, try again.
|
|
|
|
|
August 28th, 2009, 23:19
|
#3 |
|
Dear sir,
I'm using King Arms Lipo 1600 mAH battery and the battery are fully charged when I run it on the M16. Regardless, I would like to know a way in which I can permanently disable semi auto function on my AEG if I cant find a solution for semiauto lock-up. |
|
|
|
|
|
August 28th, 2009, 23:27
|
#4 |
|
aka coachster
|
what voltage? what spring? what other upgrades in this 'fully customized' mechbox?
|
|
|
|
|
August 28th, 2009, 23:36
|
#5 |
|
Dear sir,
This is my spec for the new mechbox; Deepfire reinforced V2 6mm gearbox Guarder IFTU gears Guarder Halftooth Piston Guarder IFTU motor SP 150 ( changed into PDI 210% with hope to find a solution for this problem, yet still not solvable) King Arms 11.1 V 1600maH Lipo battery. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
