Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

A&K M249 Para Lipo

:

Upgrades & Modifications

Reply
 
Thread Tools
Old August 3rd, 2009, 13:05   #1
Long_Bong
 
Long_Bong's Avatar
 
Join Date: Dec 2007
Location: Canada
A&K M249 Para Lipo

Hi,

I have a Lipo with the following dimensions (in cm):

4,3 w
1,6 h
13,4 l

Would this fit in there?

Knowing that the battery that come with it has the following dimensions:

3,4 w
1,7 h
12 l

Thanks
__________________
Long_Bong is offline   Reply With Quote
Old August 3rd, 2009, 13:54   #2
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
Not sure what the actual dimensions are ...but there's just a bit more room than a mini pack (3x3x1). A split (two sticks) 9.6v mini (4 x 4) fits as well...but it's a tight fit because of the outer barrel.

Reroute the wires and rub a black shrink wrapped extension to the box mag...there's tons of room in there.

Tys
m102404 is offline   Reply With Quote
Old August 3rd, 2009, 14:28   #3
dzik
 
dzik's Avatar
 
Join Date: Dec 2007
Location: T.O.
Potential problem.

The issue that you will run into is that the gun will cycle faster than the mag can feed it. It will shoot very fast but you will have misfires every once in a while.
dzik is offline   Reply With Quote
Old August 3rd, 2009, 14:41   #4
Eeyore
Suburban Gun Runner
 
Join Date: Jan 2009
Location: St Lambert, Quebec
This will fix the misfeed problem.
http://www.airsoftparts.ca/store2/in...roducts_id=953

And sorry bud that lipo won't fit. The internal dimentions of the handguards are;

3.6 w
4.2 h
13.5 l

Here is a site with tons of smaller lipos.
http://www.hobbycity.com/hobbycity/s...2&ParentCat=85
__________________
Quote:
Originally Posted by Pinard View Post
eeyore, the more I look at your avatar, the more I find it looks like a vagina...
http://i.imgur.com/wBfBB.gif
Eeyore is offline   Reply With Quote
Old August 3rd, 2009, 18:35   #5
Long_Bong
 
Long_Bong's Avatar
 
Join Date: Dec 2007
Location: Canada
Ok, ton confirm,

Lipo (11.1) in M249 = misfeed?

And using this part prevent it?

Ok, and I can put the battery in the box mags with re wiring?
__________________
Long_Bong is offline   Reply With Quote
Old August 3rd, 2009, 18:44   #6
Eeyore
Suburban Gun Runner
 
Join Date: Jan 2009
Location: St Lambert, Quebec
Yes the link I provided for the gear selector clip will prevent misfeeds. Yes you can put the battery in the box mag. Its not hard to re-wire. I changed my saw from rear to front wire in 10 minutes. Or alternatively get a smaller lipo.
__________________
Quote:
Originally Posted by Pinard View Post
eeyore, the more I look at your avatar, the more I find it looks like a vagina...
http://i.imgur.com/wBfBB.gif
Eeyore is offline   Reply With Quote
Old August 3rd, 2009, 22:04   #7
Long_Bong
 
Long_Bong's Avatar
 
Join Date: Dec 2007
Location: Canada
Thanks
__________________
Long_Bong is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 22:48.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.