M4 Scope affected by front sight

kullwarrior · July 26th, 2009, 02:25

Can anyone tell me or have a picture of how much is block when you use an ACOG or Red dot with the front sight post one? Like the fix ones from M4/M16

gotchya24 · July 26th, 2009, 02:29

acog clears it on mine
u dont even see the front sight at all

Eeyore · July 26th, 2009, 02:29

It depends. If you put it on the carry handle then it the front sight wont block the view at all. If you remove the carry handle and mount in on the rail you will definatley need a riser.

yuhaoyang · July 26th, 2009, 02:35

my triangle blocks a elcan right til the crosshairs when it's mounted on a flat top

KND · July 26th, 2009, 02:35

Well, if you put the Eotch or Aimpoint without riser then it would appear in your optic but for ACOG, I'm pretty sure that you won't even knew that it exist in there. No doubt about that. Hope it help.

KND

ShelledPants · July 26th, 2009, 02:56

Ptw m16 with real acog:

Shirley · July 26th, 2009, 02:58

Why not get a flip up if you're that concerned about it?
Normally, you need to have it co-witnessed incase your optics do fail.
As for RDS, you need to have both eyes opened, not only one.

turok_t · July 26th, 2009, 12:43

Regardless if ure using an ACOG (non-magnified) or aimpoint, shouldnt the top edge of the front sight be touching the reticle? Hence, shouldnt the front sight always be in view when looking through a RDS??

highny · July 26th, 2009, 13:03

I had the same problem. And the solution is saw off your front sight!...

Or... Get a flip up front sight just in case your RDS runs out of battery in middle of a big massive outdoor game.

BrokenBird · July 26th, 2009, 13:46

I have an AimPoint and it clear the IronSight without any risers.

KND · July 26th, 2009, 13:59

Quote:

Originally Posted by BrokenBird

I have an AimPoint and it clear the IronSight without any risers.

You are talking about aimpoint in your sig, right ? if so then it would clear all the way since that aimpoint already had riser.

BrokenBird · July 26th, 2009, 14:03

Yes, you are right of course it comes with its own riser.

blackcaddi · July 26th, 2009, 16:29

I got myself one of these and it works perfectly. I didn't have to change the front sight and now when you look thru my sight, the dot sits perfectly on top of the front sight.
Check this out......http://www.airsoftparts.ca/store2/in...roducts_id=205

ujiro · July 26th, 2009, 16:33

Quote:

Originally Posted by blackcaddi

I got myself one of these and it works perfectly. I didn't have to change the front sight and now when you look thru my sight, the dot sits perfectly on top of the front sight.
Check this out......http://www.airsoftparts.ca/store2/in...roducts_id=205

I also use one of these, with a replica aimpoint and the standard low mount it comes with. Slight adjustments to the reticule position, and I had it right on top of my front sight while looking through the rear sight. Perfect height. This is ideal, to have them lined up with your sights. There was a thread with this earlier. You should zero your irons to your BB's flight, then zero your RDS to your irons.

gotchya24 · July 26th, 2009, 16:39

are u talking about the ACOG with 4x scope or the acog with no magnification/

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 26th, 2009, 02:25	#1
kullwarrior Trader rating Join Date: Jan 2008 Location: Edmonton, AB, Canada	M4 Scope affected by front sight Can anyone tell me or have a picture of how much is block when you use an ACOG or Red dot with the front sight post one? Like the fix ones from M4/M16 __________________

July 26th, 2009, 02:56	#6
ShelledPants Trader rating Join Date: Feb 2008 Location: Toronto, On	Ptw m16 with real acog: __________________ Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur.

July 26th, 2009, 02:58	#7
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Why not get a flip up if you're that concerned about it? Normally, you need to have it co-witnessed incase your optics do fail. As for RDS, you need to have both eyes opened, not only one. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

July 26th, 2009, 02:29	#2
gotchya24 Trader rating Join Date: Mar 2009 Location: markham, ontario	acog clears it on mine u dont even see the front sight at all

July 26th, 2009, 02:35	#5
KND * AV revoked * Trader rating Join Date: Apr 2008 Location: Downtown Montreal	Well, if you put the Eotch or Aimpoint without riser then it would appear in your optic but for ACOG, I'm pretty sure that you won't even knew that it exist in there. No doubt about that. Hope it help. KND

July 26th, 2009, 12:43	#8
turok_t Trader rating Join Date: Feb 2009 Location: Toronto, Ontario, Canada	Regardless if ure using an ACOG (non-magnified) or aimpoint, shouldnt the top edge of the front sight be touching the reticle? Hence, shouldnt the front sight always be in view when looking through a RDS??

July 26th, 2009, 13:03	#9
highny Trader rating Join Date: Jul 2009 Location: Calgary	I had the same problem. And the solution is saw off your front sight!... Or... Get a flip up front sight just in case your RDS runs out of battery in middle of a big massive outdoor game.

July 26th, 2009, 13:46	#10
BrokenBird pɹıq spɹɐʍʞɔɐq Trader rating Join Date: Jul 2009 Location: Repentigny	I have an AimPoint and it clear the IronSight without any risers.

July 26th, 2009, 14:03	#12
BrokenBird pɹıq spɹɐʍʞɔɐq Trader rating Join Date: Jul 2009 Location: Repentigny	Yes, you are right of course it comes with its own riser.

July 26th, 2009, 16:29	#13
blackcaddi Trader rating Join Date: May 2009 Location: Mississauga	I got myself one of these and it works perfectly. I didn't have to change the front sight and now when you look thru my sight, the dot sits perfectly on top of the front sight. Check this out......http://www.airsoftparts.ca/store2/in...roducts_id=205 __________________ BLACKCADDI~TEAM SPARROW

July 26th, 2009, 16:39	#15
gotchya24 Trader rating Join Date: Mar 2009 Location: markham, ontario	are u talking about the ACOG with 4x scope or the acog with no magnification/

M4 Scope affected by front sight

Newbie Tank