Can a GR16 Blow Back COMBO gear box fit Tokyo Marui M16A2 body?

[lsbarber]

Does anyone know if a G&G GR16 Blow Back COMBO gear box can fit a Tokyo Marui M16A2 body? I am just curious if anyone out there will know, thank you

[Muffin]

I don't think so, I thought the blowback mechanism as mounted to the receiver itself. I could be wrong. Plus the receivers split differently, that may also make it tricky.

[lsbarber]

o ok thank you so much

[Weaponstech09]

The Blowback is mounted to the mechbox and should fit fine, I used a GR16 Blowback Upper reciever on a tokyo Marui M16 and it fite just fine and the TM upper fit the GR16 with no problems.

[Muffin]

Originally Posted by Weaponstech09

The Blowback is mounted to the mechbox and should fit fine, I used a GR16 Blowback Upper reciever on a tokyo Marui M16 and it fite just fine and the TM upper fit the GR16 with no problems.

Aren't G&G's slide on like metal receivers, rather then tabs like TM?

[Weaponstech09]

I took the GR16 Blowback changed the stock, Changed the Upper to a full length M16 tokyo Marui upper and mabe a GR16 full length blowback. The slide unit is attached to the mechbox not to the upper reciever. it is all one unit.