Does a PEQ make a gun front heavy?

warbird · June 3rd, 2009, 15:36

Hey, I was thinking of throwing on a PEQ battery box on the front of an M4 with a 9.6V 2400 mah Nicad battery. Would this really make the gun front heavy(unstable)? If so, I would be putting on a full stock for the battery, but the thing is I'm trying to replicate a C8.

http://www.uncompany.com/pageproduct...sp?prodid=2660

Thanks.

viraL · June 3rd, 2009, 15:40

It's not as much the PEQ unit that adds to the weight rather than the battery. Where did you usually have your battery? Just hold it out on where you wanna put it on the rail, and viola that should tell you how heavy it's going to be. Maybe add like 2 toonies for the weight of the PEQ (some are heavier than others i believe though)

warbird · June 3rd, 2009, 15:45

I meant the weight of the battery

Thing is, I don't have the gun yet, it's on its way.

Crunchmeister · June 3rd, 2009, 15:46

+1 to what viraL said. It's the battery that adds the weight. Just tape a comparable battery to the rail where you'd normally install the PEQ box and that will tell you how front heavy it is and if you can deal with the extra weight or not.

Keep in mind that what one person may find front heavy, another person may not mind at all. It's up to personal preference.

KND · June 3rd, 2009, 16:00

I'm the person who always complain about heavy gun but currently I have PEQ in my front but it's not really heavy at all, it maybe because I used Lipo battery.

KND

viraL · June 3rd, 2009, 16:09

Usually, you'd want your gun to be front heavy. Easier for point ability. I find with crane stocks and full stocks, that it almost weighs down in my shoulder. I don't like it. It also adds to the straight on your pistol grip hand, and that's not cool.

HeadlessChicken · June 3rd, 2009, 18:11

I stuck a G&P PEQ 9.6v 3300mah on my CA36 and it did add a fair bit of weight but thats because the rails are located almost at the very front of the weapon. On an M4, I'd figure it would be more balanced as the rails where you'd most likely mount the battery is a little further back.

NovaKaynE · June 3rd, 2009, 19:18

Another thing about the PEQ battery boxes. They tend to be larger than mil spec and when/if you mount the battery box on the top rail of your gun, it blocks the front post sight. If you're running an 8.4v battery, I would assume the battery box would be smaller, but I have no experience with 8.4v batteries. Just 9.6v batteries

To answer your question, the battery box does add a little bit of weight to the gun. Like the above mentioned fact and this combined, its why I switched to a rear wired crane stock option.

G&P makes a mil spec (kinda) working PEQ. Working flashlight, working red beam powered by either AA or AAA batteries. I'm gonna get that next since I don't have a battery on my rail anymore.

FOX_111 · June 3rd, 2009, 19:30

If your rifle is well ballanced, you won't find it front heavy.

I remember one of teamate having the first TM M4 RIS with a PEQ at the front and only the stock collapsible stock, it was unballanced and tirering to carry.

Now with tiny LiPo batteries, it might be a thing of the past.

Brian McIlmoyle · June 3rd, 2009, 20:19

Quote:

Originally Posted by viraL

Usually, you'd want your gun to be front heavy. Easier for point ability. I find with crane stocks and full stocks, that it almost weighs down in my shoulder. I don't like it. It also adds to the straight on your pistol grip hand, and that's not cool.

Huh?

you want your weapon balanced.. .. back weighted will imporve pointability .. but will also cause wide spacing of shots in reflexive shooting.

Front heavy will result in low or also widespacing ( even wider ) when reacting to targets.

Idealy you want a weapon that is well balanced and rests in your grip without having to be held tightly.

AS guns tend to be front heavy anyway as most have overly light receivers and stocks

Adding a lot of "stuff" to the fore end will make it worse.

in the end poor balance is worse than heavy weight when it comes to shooting.

L473ncy · June 3rd, 2009, 21:59

I have my PEQ mounted on the top and front. I personally find that it's well balanced (all metal gun and body) but I would feel a bit more comfortable if there was a bit more weight at the back.

Otherwise for me it's good. Even my teammates say it's nice and well balanced.

YMMV.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 3rd, 2009, 15:36	#1
warbird Trader rating Join Date: Oct 2006 Location: NB, Canada	Does a PEQ make a gun front heavy? Hey, I was thinking of throwing on a PEQ battery box on the front of an M4 with a 9.6V 2400 mah Nicad battery. Would this really make the gun front heavy(unstable)? If so, I would be putting on a full stock for the battery, but the thing is I'm trying to replicate a C8. http://www.uncompany.com/pageproduct...sp?prodid=2660 Thanks. Last edited by warbird; June 3rd, 2009 at 15:41..

June 3rd, 2009, 15:46	#4
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	+1 to what viraL said. It's the battery that adds the weight. Just tape a comparable battery to the rail where you'd normally install the PEQ box and that will tell you how front heavy it is and if you can deal with the extra weight or not. Keep in mind that what one person may find front heavy, another person may not mind at all. It's up to personal preference. __________________

June 3rd, 2009, 16:00	#5
KND * AV revoked * Trader rating Join Date: Apr 2008 Location: Downtown Montreal	I'm the person who always complain about heavy gun but currently I have PEQ in my front but it's not really heavy at all, it maybe because I used Lipo battery. KND __________________

June 3rd, 2009, 15:40	#2
viraL Envies Disaster_Piece's hair Trader rating Join Date: Feb 2009 Location: Burlington, ON	It's not as much the PEQ unit that adds to the weight rather than the battery. Where did you usually have your battery? Just hold it out on where you wanna put it on the rail, and viola that should tell you how heavy it's going to be. Maybe add like 2 toonies for the weight of the PEQ (some are heavier than others i believe though)

June 3rd, 2009, 15:45	#3
warbird Trader rating Join Date: Oct 2006 Location: NB, Canada	I meant the weight of the battery Thing is, I don't have the gun yet, it's on its way.

June 3rd, 2009, 16:09	#6
viraL Envies Disaster_Piece's hair Trader rating Join Date: Feb 2009 Location: Burlington, ON	Usually, you'd want your gun to be front heavy. Easier for point ability. I find with crane stocks and full stocks, that it almost weighs down in my shoulder. I don't like it. It also adds to the straight on your pistol grip hand, and that's not cool.

June 3rd, 2009, 18:11	#7
HeadlessChicken Trader rating Join Date: Oct 2008 Location: Toronto, Ontario, Canada	I stuck a G&P PEQ 9.6v 3300mah on my CA36 and it did add a fair bit of weight but thats because the rails are located almost at the very front of the weapon. On an M4, I'd figure it would be more balanced as the rails where you'd most likely mount the battery is a little further back. __________________ "Hey I'm the first one to say its a great country but its a straaaaange culture. This is a place where gun store owners are given a list of stolen credit cards but not a list of CRIMINALS and MANIACS. And now they're thinking of banning toy guns...AND THEY'RE GONNA KEEP THE F**KING REAL ONES!" -George Carlin 1937 - 2008 (RIP buddy)

June 3rd, 2009, 19:18	#8
NovaKaynE Trader rating Join Date: Mar 2008 Location: Durham Region	Another thing about the PEQ battery boxes. They tend to be larger than mil spec and when/if you mount the battery box on the top rail of your gun, it blocks the front post sight. If you're running an 8.4v battery, I would assume the battery box would be smaller, but I have no experience with 8.4v batteries. Just 9.6v batteries To answer your question, the battery box does add a little bit of weight to the gun. Like the above mentioned fact and this combined, its why I switched to a rear wired crane stock option. G&P makes a mil spec (kinda) working PEQ. Working flashlight, working red beam powered by either AA or AAA batteries. I'm gonna get that next since I don't have a battery on my rail anymore. __________________ *The Distance Between Courage & Stupidity Is Exactly Nine Millimeters*

June 3rd, 2009, 19:30	#9
FOX_111 Le Roi des poissons d'avril Trader rating Join Date: Dec 2003 Location: Terrebonne, Québec	If your rifle is well ballanced, you won't find it front heavy. I remember one of teamate having the first TM M4 RIS with a PEQ at the front and only the stock collapsible stock, it was unballanced and tirering to carry. Now with tiny LiPo batteries, it might be a thing of the past. __________________ Vérificateur d'âge: Terrebonne

June 3rd, 2009, 21:59	#11
L473ncy Trader rating Join Date: Oct 2004 Location: 11-30-24-1W5	I have my PEQ mounted on the top and front. I personally find that it's well balanced (all metal gun and body) but I would feel a bit more comfortable if there was a bit more weight at the back. Otherwise for me it's good. Even my teammates say it's nice and well balanced. YMMV. __________________ ಠ_ಠLess QQ more Pew Pew READY TO >> RACE

Does a PEQ make a gun front heavy?

Newbie Tank