[daddy6stringer]

I have had this issue in the past with a CA36E. While pulling the trigger, I noticed that the cutoff lever would be stuck, as well. I disassembled the mechbox, and reassembled it, and it worked fine. I am not 100% sure of what the issue is, though I suspect something along the lines of what m10424(sorry if I got that wrong) said...Should you find a definite answer, if you could let me know I would be grateful. It's obviously something in the reassembly process, as everything will be fine when you open it. I did notice on mine however, that if I tightened the spring guide area mechbox screw, and cross (X) tightened them from there, this issue would not occur. I don't know why, but that's how it worked for me.