Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Themed Airsoft > Other Regions
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Snipers Corner

:

Other Regions

Reply
 
Thread Tools
Old March 14th, 2006, 21:51   #226
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Lol
CDN_Stalker is offline   Reply With Quote
Old March 18th, 2006, 03:10   #227
wey ferro
 
wey ferro's Avatar
 
Join Date: Dec 2004
hey yall, i just got and put in my new bolt upgrade in my CA m24
this one: http://www.uncompany.com/pageproduct...sp?prodid=1735
its nuts!!!!!!!! haha
with .20 it broke a beer bottle and went clean through a full beer can.
but the trigger pull is so hard i almost break myfinger, got any suggestions on a new trigger set up or something i cant do to fix it?
and who knows how hard that is (APS300 % spring)?
oh and what weightof bb's doyou reccommend for best preformance?

oh and stalker, what size is that hopup allen screw?
__________________
www.ferroconcepts.com
wey ferro is offline   Reply With Quote
Old March 18th, 2006, 09:02   #228
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
Quote:
Originally Posted by wey ferro
hey yall, i just got and put in my new bolt upgrade in my CA m24
this one: http://www.uncompany.com/pageproduct...sp?prodid=1735
its nuts!!!!!!!! haha
with .20 it broke a beer bottle and went clean through a full beer can.
but the trigger pull is so hard i almost break myfinger, got any suggestions on a new trigger set up or something i cant do to fix it?
and who knows how hard that is (APS300 % spring)?
oh and what weightof bb's doyou reccommend for best preformance?

oh and stalker, what size is that hopup allen screw?
Remove your safety. Put some white litium grease inside the trigger mecanisme. I did that to mine after a good cleaning and the trigger was way smooter. It's still pretty hard, but it don't hurt my finger anymore.

When you pull back on the bolt, make sure you hold it well, in a manner not to twist the handle and break the back part of the bolt. Hard to explain the right technique, but I think you will figure it out.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old March 18th, 2006, 10:23   #229
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Fox has it right, remove the safety lever and the pin that mates it to the trigger. Pair of pliers on it and yank. It won't harm anything, but will GREATLY lighten up and smooth the trigger pull.

Avoid the PDI 300% spring, it is impossible to cock the gun (aka. have to put the muzzle on your foot, shoulder into the stock and reef on it) as well it'll end up destroying your gun (will ram the hop up unit hard each shot, forcing it forward and stripping out the securing screws). It'll also spit out BBs at over 550fps. If you want upwards of 500fps, go with a (First Factory) Laylax 150SP spring. It's very nice to cock and doesn't destroy the gun.

Best BBs are 0.29g SGM, or non-graphite/graphite washed off Straight 0.30g and 0.36g BBs. 0.43g are pretty heavy to use unless you are shooting 150ft away. Don't expect to get a lot of range out of them.

Hop up adjust screw allen key? Can't say, I've always just gone with the one that fits. Make sure you buy a set of long (as in ball end, about 5" long allen keys that fit into a screwdriver type handle) allen keys, they will make life a hell of a lot easier for you adjusting the hop up. Using a dinky little allen key will be frustrating for you.

Cocking it properly, total must! Grasp the cocking handle over the top, place your thumb on the handle boss (backside of the cylinder), rotate about 45deg, pull back then slide it forward. Don't ram it forward, you could damage the BB going into the chamber, and if no more BBs you'll screw up your mag follower, driving it into the fragile feed lips of the mag. If that happens, you'll be double loading BBs all the time.
CDN_Stalker is offline   Reply With Quote
Old March 18th, 2006, 13:20   #230
wey ferro
 
wey ferro's Avatar
 
Join Date: Dec 2004
thanks for the trigger tip
i do already know how to cock it back though hehehe.
the bolt i have came with every thing in it so im just gonna leave it alone as is.
its got the APS300 % spring
http://www.uncompany.com/pageproduct...sp?prodid=1735
oh and on mine the screw that holds the hop up in place doesnt have any threads in it any more haha, it came like that i just have a bit bigger screw in there that is kinda holding itin place. i need to rethread it and im gonna make a second one too.
__________________
www.ferroconcepts.com
wey ferro is offline   Reply With Quote
Old March 18th, 2006, 13:38   #231
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Ya, pretty much what mine came with. Shot 0.20g BBs around 550fps and was a bugger to pull, accuracy sucked ass. Only thing that remains in my gun is the cylinder & head now.
CDN_Stalker is offline   Reply With Quote
Old March 18th, 2006, 13:43   #232
wey ferro
 
wey ferro's Avatar
 
Join Date: Dec 2004
so you suggest that i get a lower spring?
__________________
www.ferroconcepts.com
wey ferro is offline   Reply With Quote
Old March 18th, 2006, 14:26   #233
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
I suggest you get a BETTER spring. Hop on a WGC order and get a PSS2 Laylax XXXSP spring. They are marked in m/s, so just use an online unit converter to sort out what you are wanting. 130SP should be fine with that set up, might need a better piston and spring guide (of the bearing type). If you are going all the way, get the spring, bearing spring guide and the ultralight aluminim piston (it's blue, and buy the blue piston head). What you have will do for a bit, but the spring weakens over time and you won't get much consistancy or accuracy out of that set up.
CDN_Stalker is offline   Reply With Quote
Old March 18th, 2006, 15:04   #234
wey ferro
 
wey ferro's Avatar
 
Join Date: Dec 2004
alright thanks.
__________________
www.ferroconcepts.com
wey ferro is offline   Reply With Quote
Old March 19th, 2006, 13:59   #235
Keyboard
 
Join Date: Apr 2003
Location: Toronto, Ontario, Canada
Send a message via AIM to Keyboard
Hey Stalker,

Since my MSN hasn't been working for a while now I'm gonna ask you here if you don't mind :P

You gave me a list of parts, and I'm just confirming that these are the right parts to order for my CA M24:

First Factory Parts - Springs
FF-SP-150SP
First Factory - PSS2 150 Spring for APS2 In Stock US$21.00 First Factory Parts - Springs
http://www.wgcshop.com/WGC_Shop/imag..._150sp_low.jpg

Guarder Other Parts - APS2
GD-APS2-02
Guarder Precision Piston Head for APS2 Series In Stock US$7.50
http://www.wgcshop.com/WGC_Shop/imag...ps2_02_low.jpg

Guarder Other Parts - APS2
GD-APS2-03
Guarder Ultra Light Aluminum Piston for APS2 Series In Stock US$29.00
http://www.wgcshop.com/WGC_Shop/imag...ps2_03_low.jpg

Guarder Other Parts - APS2
GD-PT-APS04B
Guarder Ball Bearing Spring Guide for APS-2 Series ( 9mm ) In Stock US$15.00
http://www.wgcshop.com/WGC_Shop/imag...s2_04b_low.jpg

Guarder Parts for AEG - AEG Series
GD-PT-GE0701
Guarder Hop Bucking In Stock US$4.00
http://www.wgcshop.com/WGC_Shop/imag...ge0701_low.jpg

Accurate Barrels for AEGs - PROMETHEUS
PM-ACC-534
Prometheus 6.03 EG Barrel for SG550 ( 534mm ) In Stock US$52.00
http://www.wgcshop.com/WGC_Shop/imag...barrel_low.jpg


I could find all parts on WGC except for the last one, the Prometheus barrel, are all the rest of the parts correct? Are there any other parts I might need?

Thanks a million!
__________________
GEAR FOR SALE - LEAVING SPORT
http://www.airsoftcanada.com/showthread.php?t=44222
ACCESSORIES FOR SALE - LEAVING SPORT
http://www.airsoftcanada.com/showthread.php?t=44226
Keyboard is offline   Reply With Quote
Old April 2nd, 2006, 01:47   #236
G_unit
 
G_unit's Avatar
 
Join Date: Jan 2004
Location: Red Deer
Okay, I have a bit of a problem. I'm trying to sight my M40A1, with no adjustments to my scope, and about 120ft away from say a rim with a tire, I have to aim up and to the left. Should I get lower scope mount. Mine are high, would medium make adjustments for sighting easier?
G_unit is offline   Reply With Quote
Old April 2nd, 2006, 01:56   #237
Goldman
 
Goldman's Avatar
 
Join Date: Dec 2001
Location: Toronto
Send a message via MSN to Goldman
Quote:
Originally Posted by G_unit
Okay, I have a bit of a problem. I'm trying to sight my M40A1, with no adjustments to my scope, and about 120ft away from say a rim with a tire, I have to aim up and to the left. Should I get lower scope mount. Mine are high, would medium make adjustments for sighting easier?
Do you mean to say that rather than adjusting your scope for elevation and such, your thinking about changing your mounts?

It would be easier to just adjust the scope. rings should be used to set the scope at a comfortable position to you. If you could still shoot comfortably with low-mounts, then by all means go for it. But remember that it won't totally fix your sighting issues.
__________________
Maybe you'll find someone else to help you. Maybe black mesa... THAT WAS A JOKE, ha ha, fat chance.

My Buy/Sell 1337ness rating
Goldman is offline   Reply With Quote
Old April 2nd, 2006, 03:41   #238
G_unit
 
G_unit's Avatar
 
Join Date: Jan 2004
Location: Red Deer
But would it improve them slightly?
G_unit is offline   Reply With Quote
Old April 2nd, 2006, 05:01   #239
[Lithium]
 
Join Date: Nov 2005
Location: Vancouver
As long as your scope is adjested it should be fine.. Mounts raise the height of the scope itself. they do not affect the aiming im pretty sure..
__________________

HeL is another name i go by
[Lithium] is offline   Reply With Quote
Old April 2nd, 2006, 05:25   #240
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
Quote:
Originally Posted by [Lithium]
As long as your scope is adjested it should be fine.. Mounts raise the height of the scope itself. they do not affect the aiming im pretty sure..
My mind is yelling at me that higher sights does negatively affect aiming, but at 4AM it can't seem to explain it to me beyond the simple fact that higher sight makes for higher aim.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Themed Airsoft > Other Regions

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 06:47.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.