Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Gear Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Radios and You

:

Gear Discussion

Reply
 
Thread Tools
Old April 16th, 2014, 15:47   #31
Cobrajr122
2 Cent Tactical
 
Cobrajr122's Avatar
 
Join Date: Apr 2006
Location: NB
The last 2 have a slightly different UHF range of 400-480MHz vs the regular 400-470MHz.

Not a big deal, makes no difference.
Cobrajr122 is offline   Reply With Quote
Old April 16th, 2014, 17:43   #32
FirestormX
 
FirestormX's Avatar
 
Join Date: Jun 2010
Location: Mississauga, Ontario
What's the advantage of having a quality PTT?
Is it mostly just reliability? I always see people smacking their PTTs; unplugging them and plugging them back in.

Or does it provide noticeable clarity, etc, too?
FirestormX is offline   Reply With Quote
Old April 16th, 2014, 17:59   #33
leth1337
 
leth1337's Avatar
 
Join Date: Apr 2006
Location: York Region, Ontario
No smacking required, rugged, durable, better signal transfer so in turn better or PROPER quality
__________________
WHISKEY-13
leth1337 is offline   Reply With Quote
Old April 16th, 2014, 18:06   #34
Cliffradical
butthurt for not having a user title
 
Cliffradical's Avatar
 
Join Date: Jun 2010
Location: Winnipeg
Mostly, the advantage lies in having the 'talk' button in an area on your body which is both quickly and easily accessible while keeping it out of the way of any other gear. It also creates a wiring hub which allows you to run cabling in such a way that keeps it out of the way as well (i.e: PTT goes on off-hand shoulder/ chest region, off-hand has little travel distance between the PTT and your weapon system, main hand stays in a ready-to-fire position on the weapon system without interruption, wiring is tight to your PC/ LBV and is less likely to snag on twigs, mags, your elbows etc).

With standardized PTTs of decent quality you can attach your radio, the PTT, and their shared wiring to your plate carrier or LBV more-or-less permanently, leaving the headset and radio as their own separate entities. This is good for your range of movement, as well as allowing you to hot-swap headsets and radios or affect adjustments/ repairs on the fly without forcing you to dismantle the entire system.

The advantages of clarity and reliability are a direct result of the quality of the PTT itself, the quality of the wiring, and the type of connector at the PTT-> radio endpoint (smacking a PTT may be a sign of poorly soldered/ worn out connections, Motorola Single Pin carries everything on one tiny prong and is therefore terrible by nature etc).
Cliffradical is offline   Reply With Quote
Old April 16th, 2014, 18:07   #35
Cobrajr122
2 Cent Tactical
 
Cobrajr122's Avatar
 
Join Date: Apr 2006
Location: NB
Pretty much just reliability.
There might be a hardly noticeable increase in audio quality because of thicker wires.
Cobrajr122 is offline   Reply With Quote
Old April 16th, 2014, 18:41   #36
FirestormX
 
FirestormX's Avatar
 
Join Date: Jun 2010
Location: Mississauga, Ontario
Thanks guys.
FirestormX is offline   Reply With Quote
Old May 30th, 2014, 00:39   #37
Kiakaha_lp
 
Join Date: Jan 2014
thanks! radio problem solved
Kiakaha_lp is offline   Reply With Quote
Old June 4th, 2014, 19:37   #38
WPJ
 
Join Date: May 2014
Location: GTA/Toronto
Quote:
Originally Posted by Cobrajr122 View Post
Folding those blade antennas electrically shortens the length and will decrease the reception properties.

Think of it like a net, the larger the net, the more of the signal you are receiving. However, if your net is larger your net, the more potential there is to pickup the background noise and whatnot, especially when you move past 1 wavelength.
This can also un-match the antenna to the designed frequency and this will introduce a much higher SWR which can permanently damage the front end of the radio making it totally useless sometimes. But hey it looks cool cause the mil guys do it. Heber there radios are designed to tolerate much higher swr and when the blow the front end they just swap it out with antihero from stores ad have the original fixed. YMMV
WPJ is offline   Reply With Quote
Old June 4th, 2014, 20:11   #39
WPJ
 
Join Date: May 2014
Location: GTA/Toronto
Quote:
Originally Posted by Cobrajr122 View Post
Radios In Airsoft and You: Basics of Telecommunications

So before I start - I would like to state:
NOTICE : If you disagree with using 4 watt transmitters on the FRS or GMRS bands, or want to challenge the legalities, or are deathly afraid that the police will drop out of the ethosphere and bust you for using overpowered radios, please STOP READING HERE.

--------------------
Great info but also to add to that using illegal radios in Canada. They may work fine and dandy but IC not allows you to use a radio which it WA designed foe ie you can't use a commercial radio on CRS etc. But a lot of people do it still.

Again great info love it.
WPJ is offline   Reply With Quote
Old June 4th, 2014, 20:32   #40
Cobrajr122
2 Cent Tactical
 
Cobrajr122's Avatar
 
Join Date: Apr 2006
Location: NB
Quote:
Originally Posted by WPJ View Post
This can also un-match the antenna to the designed frequency and this will introduce a much higher SWR which can permanently damage the front end of the radio making it totally useless sometimes. But hey it looks cool cause the mil guys do it. Heber there radios are designed to tolerate much higher swr and when the blow the front end they just swap it out with antihero from stores ad have the original fixed. YMMV
Changing the length of the antenna will not change its designed impedance. As long as it presents 50 Ohms load on the opposite end of the transmission line as the generator its good.

Seeing as the majority of people on here will be running their antennas directly to the radios, SWR is nearly a nil factor as there is no transmission line for it to reside on.

Quote:
Originally Posted by WPJ View Post
Great info but also to add to that using illegal radios in Canada. They may work fine and dandy but IC not allows you to use a radio which it WA designed foe ie you can't use a commercial radio on CRS etc. But a lot of people do it still.

Again great info love it.
Yep, that was the whole point of my sentence, there is a guy who works for IC that plays with us and happily uses these radios alongside us at games.
Cobrajr122 is offline   Reply With Quote
Old June 4th, 2014, 21:17   #41
Drake
E-01
 
Drake's Avatar
 
Join Date: Dec 2001
Location: Montreal, QC
Quote:
Originally Posted by WPJ View Post
This can also un-match the antenna to the designed frequency and this will introduce a much higher SWR which can permanently damage the front end of the radio making it totally useless sometimes. But hey it looks cool cause the mil guys do it. Heber there radios are designed to tolerate much higher swr and when the blow the front end they just swap it out with antihero from stores ad have the original fixed. YMMV
Note that most of the repro (AN/PRC variety) radios are basically the same as other Chinese programmable UHFs and those blade antennas are just a normal 4W/400Mhz antenna hidden inside a blade-style shell. Unless you're trying to mount a real PRC blade on a Chinese UHF it shouldn't be a problem.
__________________
Drake is offline   Reply With Quote
Old June 4th, 2014, 22:11   #42
WPJ
 
Join Date: May 2014
Location: GTA/Toronto
Quote:
Originally Posted by Cobrajr122 View Post
Changing the length of the antenna will not change its designed impedance. As long as it presents 50 Ohms load on the opposite end of the transmission line as the generator its good.

Seeing as the majority of people on here will be running their antennas directly to the radios, SWR is nearly a nil factor as there is no transmission line for it to reside on.



Yep, that was the whole point of my sentence, there is a guy who works for IC that plays with us and happily uses these radios alongside us at games.
Actually it does and it can be a dramatic change hence the warning, if you don't believe me place an antenna analyzer on the antenna when t is as designed then bend touch it etch then watch it go from say 1.5 to over 10-20 ouch.
WPJ is offline   Reply With Quote
Old June 8th, 2014, 19:51   #43
barberouge
 
Join Date: Jun 2014
SWR apply to both antenna line and antennas, that for sure.

Antenna that are telescopic tend to suffer from bad SWR, just stick to a simple antenna like a Nagoya.

By the way, MURS is still not legal in Canada:

http://www.ic.gc.ca/eic/site/smt-gst...g/sf10822.html

Last edited by barberouge; June 10th, 2014 at 11:09..
barberouge is offline   Reply With Quote
Old June 24th, 2014, 19:08   #44
Kayn
 
Kayn's Avatar
 
Join Date: Mar 2014
wow that is very comprehensive, good job.
__________________


A problem is a chance for you to do your best.
Duke Ellington
Kayn is offline   Reply With Quote
Old June 25th, 2014, 13:50   #45
DrDoUm
 
DrDoUm's Avatar
 
Join Date: Feb 2007
Private channels

Does any of you guys use "private" channels for your team? If so, how do you achieve it?

I was thinking of using MURS frequencies then saw barberouge's post, so I figured it was a bad idea.

Then I thought of using "in between" frequencies in the GMRS range. But I'm afraid of "bleeding" on other frequencies.

Any other thoughts?

EDIT: the purpose would be to have a team dedicated channel when we attend 200+ players events.
__________________
DrDoUm is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Gear Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 08:18.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.